Pramac Logo

Pramac Popular Questions, Answers, Tips & Manuals

Do you work here? Claim your company

  • 100 Products
  • 167 Answers
  • 27K Views

I don't know your equipment, but the unbalanced term may refer to too large a load connected to one leg of your split phase service. Go to your load panels and try to get the amps drawn by your loads to be more equal. You may be over taxing one leg and have available capacity on the other, assuming you are running a 110/220 V split phase output.

Pramac... | 34 views | 0 helpful votes


website reliablestore it is very good.. I used it to repair my shredder it had some spark issue which wasn't easily fixed. you can go there and try

Pramac... | 44 views | 0 helpful votes


by finding the problem --check oil and circuits

Pramac... | 49 views | 0 helpful votes


Check fuse. If there is an indicator, instrument or light, on the output, check what it says. Loose contact is a possibility.

Pramac Powermate... | 216 views | 0 helpful votes


Check for floating debris in fuel tank possibly restricting fuel flow thru screen on bottom of fuel pickup;

Pramac... | 274 views | 0 helpful votes


Check for low oil level. If level is OK, check low oil level sensor. Disconnect the wire to test.

Pramac... | 80 views | 0 helpful votes


Hi is it electric or a manual pump up with the handle type if its one these check the oil level in the unit it may just need more hydroloc oil added or the valve on the actual jack of the unit its self are leakin and need replaceing dont use it like this as very dangerous
,

Pramac... | 1,312 views | 0 helpful votes


Sounds like fuel starvation. Check fuel tap, the vent in the cap, and personally, I would take the carburettor off and clean it out.

Pramac... | 38 views | 0 helpful votes


Try Googling (Pramac)(P6000s)(manual) without parens.

Pramac... | 262 views | 1 helpful votes


Aha, you mean the Pramac agent? There is not one in Trinidad, the nearest listed is in the Dominican Republic. See here

http://www.pramac.com/worldwide

.

Pramac... | 30 views | 0 helpful votes


normal engine oil 15w-30

Pramac... | 117 views | 1 helpful votes


We sell them at Generator Guru:
http://www.generatorguru.com/p6000s/?sort=featured

Pramac P6000... | 110 views | 0 helpful votes


There should be an area on the stick with cross marks on it. Try to fill it to the upper part of that cross hatch section

Pramac ES3000... | 76 views | 0 helpful votes


The first thing I would look for would be internal fuses blown. This sounds like a 460 volt 12,000 watt industrial generator and you probably should call the installing contractor for service. My 15,000 watt generator is over 30 years old and has less than 700 hours on it and those are mostly test-run hours.

Pramac... | 170 views | 0 helpful votes


Could be the return spring on the regulator has come off.

Pramac Generator... | 89 views | 0 helpful votes

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Pramac Experts

Marvin
Marvin

Level 3 Expert

84581 Answers

Lawrence Oravetz

Level 3 Expert

10528 Answers

wadingriver
wadingriver

Level 3 Expert

2222 Answers

Are you a Pramac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...