Powmax Computers & Internet - Recent Questions, Troubleshooting & Support
I have a Power Judge
Try to measure voltage on power supply with a more acurate tester and you will see if your power tester is good or not. This is the easy way to control acuracy of your tester.
NO SOFTWARE IN THE BOX!!!!!
Place a hard drive in the enclosure, connect it via USB to the computer and the operating system should identify the drive.
If you are talking about the backup solution software that is supposed to be packaged with it, you might be out of luck. In this case turn your luck around by installing a
backup solution. Or install/run Windows backup utility which maybe found on C: in VALUEADD MSFT NTBACKUP.
Reconnecting 2 cables to the
Hi,
I'm not sure what exactly your referring to. The Powmax UPS system doesn't have any cables to connect. At least not on the outside. If your referring to the inside of the UPS system, what are you trying to hook up? Perhaps you can repost what it is your referring to so I can help.
Thanks
Mark
Hi!! Thank you for your time! We're doing our
A few questions. Is it an stand alone one? seems to me a 500VA rated UPS, for light loads only.
Some stand alone common problem.
1. Battery for replacement
2. Fuse busted
3. Faulty relay
If repair and battery replacement outweighs the new one or got a small difference. Its better to have a new UPS unit.
Hope this helps
Digital camera
The Kodak program seems to have many problems like this.
Uninstall Easy share, and get Picasa:
http://picasa.google.com/
This photo organizer will find all your images and has some good editing functions. It will import from most cameras, is easy to use and free.
Comp wont start up
The hard disk may have died. Check the BIOS and check the hard disk setting, if it appears OK then boot up with a DOS floppy startup boot disk, and select boot up without CD-ROM support, then type fdisk, answer Y to large disk support, select 4 to Display partition information.
If you see all your disk partition the most likely your hard disk is OK.
Most likely you operating system is damaged/corrupted and you will need to reinstall your operating system and drivers for all your devices.
I have an old e
The old AT power supply that these old computers uses has two six pin socket connectors and these are different to the ATX connector.
You cannot buy these power supply now, most likely you might find one/computer in a junk shop.
If you have electronic knowledge you might be able to cut off the connectors from the old power supply and connect it to the ATX power supply and modify the ATX power supply so you can switch on the power to the old computer. The old AT power supply uses a mains power switch whereas the ATX uses low voltage to turn on the power supply.
Good luck & have fun.
P4T-E PSU
your connector is of two part.it has total of 24 pin, can be divided into 20 and 4 pins.connect 20 pin in your mother board .switch on ur psu and connect 4 pins to another port.
My Employer Says They Are Going To Cut My Wages. Can They?
If you are in the middle of a contract, then cutting your wages is almost certainly a violation of your employment law rights. While I am by no means an expert on this matter, I did have a similar issue years ago - mid-contract wage cuts - and I hired an
employment attorney to fight the case on my behalf. It turned out that my employer was basically looking to scare people into taking the wage cut.
They got into some pretty serious legal trouble for their transgression, and nothing happened to me in terms of wage cuts after that. If you are between contracts, your employer can re-negotiate your salary, but as far as I am aware, if you are in an agreed-upon contract, they cannot just decide to reduce your salary. If you want to settle matters, contest this action with support from a legal professional.
Solitaire master has a hang
clarify pi please. if you meant pi to mean main screen picture, you probably have used up your free time on this program.
Not finding what you are looking for?
