Powerware Computers & Internet - Page 7 - Recent Questions, Troubleshooting & Support

You can set the output voltage from the LCD display. Goto UPS Setting todo this

The battery is dead. It should ready at least 13.5V on a new 12V battery. Battery have to be charge every 6 month.

Try contacting anyone of them. Eaton Power Quality Ltd Tech & Service Support AC UPS Systems T +44 (0) 1753 608 700 221 Dover Road Slough, Berkshire SL1 4RF United KingdomTech & Service Support DC Systems and ePDU DC T +44 (0) 1243 810 500 ePDU +44(0) 1243 810 654 Durban Road Bognor Regis, West Sussex PO22 9QT United KingdomTech & Service Support Switch gear Eaton Electric Limited Customer Service Centre Grimshaw Lane MiddletonManchester (UK) M24 1GQ Tel: +44 (0) 8700 545 333 Fax: +44 (0) 8700 540 333 email: [email protected]

The charger board has fail. No point replacing it. Better to buy a new. This unit has already been obselete

Does the fan come with 2 or 3 wire.

The Live and Neutral wire on the input socket have been reverse. Once you undo this problem, the fault should go off.

Jose,Can you please be more descriptive with the fault. Is there a fault code number?If you need UPS, Surge, or Power Related help don't hesitate to contact me!Daniel • [email protected] • Power & Systems Innovations • 800.260.2259 • www.psihq.com

Abarna,Seems like your UPS load isn't turned on. Check to make sure that the batteries inside of the UPS are good and then turn the load on.If you need UPS, Surge, or Power Related help contact Daniel @ Power & Systems Innovations 800.260.2259 or go to our website: http://psihq.com/

Check to make sure your connections are correct and tight.If you need UPS, Surge, or Power Related help contact Daniel @ Power & Systems Innovations 800.260.2259 or go to our website: http://psihq.com/

Hi Jethrol,Make sure that the batteries are good, if they are anywhere between 3-5+ years old it's time to change them.Have you tested the unit by cutting power to it and seeing what happens? NOTE: POSSIBLE LOAD LOSS IF UPS DOES NOT SUPPORT LOAD.Reply or call if you need more help with this -- 407.380.9200

710-12102-0X - PCBAS 9120 5-6KVA CNTL-1112NN - £107.67 + delivery + VAT from the Manufacturer - Eaton Power Quality Ltd

Normally DC BUS FAULT is fixed by replacing C14 and C10. C14 is the 100uf/63V and C10 is 2200uf/16V. They are located between the heat dissipator and the logic board near transformer TX1.

check the fuses inside the ups.
did the message come right after u instal de batteries or some time after?
if it came some time after the ups could have the charger damaged.
if gave the massage right after u could need to replace the fuse or u have a porwerboard problem
good luck