Jam up
Use a small screwdriver and insert it in the tabbaco outlet to get the tabbaco out. be care full not to overstuff when filling.If you get a lot of jams the tabbaco can be to moist. if so let it dry out a little before inserting. Also the bottom of the bag 'shake' will jam the machine.A nice tabbaco that is very easy on any machine is a virginia blend.
11/16/2021 3:10:15 AM •
Powermatic 2...
•
Answered
on Nov 16, 2021
•
2,380 views
Tobacco only goes half way down thetube
inspect that the rubber piece that holds the tube.Chance's are that it is worn and needs to be replaced. it wont hold the tube all the way if it is worn. A quick fix is to cut a piece of eraser of a pencil and glue it to the holder.
10/25/2021 2:28:46 PM •
Powermatic 2...
•
Answered
on Oct 25, 2021
•
1,854 views
Truing the fence on a Powermatic 66 table saw
There should be some screws on the bottom side of the fence that allow you to make adjustments. Loosen then slightly then set the fence to 90 degrees & then tighten them.
1/5/2018 1:44:47 AM •
Powermatic...
•
Answered
on Jan 05, 2018
•
123 views
Tube will not fill near filter
Trick i have learned is to put a small amount of tobbaco in the chamber now move it side to side with your finger tips. Now add more tobbaco to the chamber as you normaly would.It will fill the tube better If that does not work out for you try virginia blend tobbaco it will work better in any machine...
10/20/2021 8:56:24 PM •
Powermatic 2...
•
Answered
on Oct 20, 2021
•
5,936 views
Not finding what you are looking for?