Power Acoustik Logo

Power Acoustik Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 610 Products
  • 5K Answers
  • 251K Views

This one Wire should be for the +. Try connecting the + to the Head Unit and - to a Common Ground. At the Worst, You will Blow the Amp Fuse if not Correct. The Lead from the Head Unit is Only an Off and On from the Ignition. Please Rate My Response! Thanks!

Power Acoustik... | Answered on Jul 22, 2015


Ohm's Law says watts / volts = amps, so 1000/12 is 83+change -- damn! I hope you have a big, phat alternator! So fuses have to be rated somewhat higher than device load, you need a 90 amp or 100 amp fuse -- what style I couldn't even begin to guess, normal automotive fuses don't go that high.

If this is a new install, make sure your power wires are heavy enough to handle the load. A fuse's job is to blow before the wiring catches fire. The longer the wire is, the thicker it must be. Electrical fire is a catastrophe so make sure your wiring is adequate -- I know it's hard to believe but the power wire is actually more important than the speaker wire!

Power Acoustik... | Answered on Jun 28, 2015


be sure the amp is located in a well ventilated area as heat build up can cause a safety override to cut power once temp. reaches a certain point. amps do generate heat though so if you dont think its cutting out due to excessive heat building up, i'd definitely get a power capacitor to help keep a steady supply of electrical energy available for instances where the bass hits really hard or for prolonged periods of time. if you have a power cap already make sure it doesnt need to be upgraded to function properly. hope this helps!

Power Acoustik... | Answered on Jun 06, 2015


MP4 is a codec that is not compatible with this DVD player. Your DVD player will play store bought DVDs just fine. Please read the specifications in the owners manual to see what codecs are compatible with your player.

Power Acoustik... | Answered on May 30, 2015


I was unable to retrieve the manual for your unit. I would unplug your car battery for an hour or so. I would then reattach the battery cables. This will hopefully reset your stereo. Now try to use your car stereo as you normally would. If this works you will have to set up the stereo again.

Power Acoustik... | Answered on May 28, 2015


Dirt on the lazer lens or if you are talking about DVD discs the wrong region code being set on the machine.

Power Acoustik... | Answered on Apr 28, 2015

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Power Acoustik Experts

Tom Chichester

Level 3 Expert

51324 Answers

 Mikey
Mikey

Level 3 Expert

5746 Answers

JonSnell Electronic
JonSnell Electronic

Level 3 Expert

29402 Answers

Are you a Power Acoustik Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...