Popular Questions, Answers, Tips & Manuals - Page 11
How do these points equate to money?
No money ever!
There is no payment made for answers on Fixya, points don't mean prizes, they are just for fun.
ADMIN Andrew
- Answers: 65,820 and not a penny per Answer.
Head over to
www.justanswer.com they pay lots of money because they charge for people to ask a question.
..
What kind of oil should I use in my 2010 hyundai santa fe?
For your 2010 Hyundai Santa Fe, the recommended engine oil type depends on the specific trim. Let's explore the options:
Santa Fe 2.2 CRDi:
Recommended oil types: ACEA C3, ACEA A3/B4, SAE 0W-30, SAE 0W-40, SAE 10W-40, SAE 10W-60, SAE 15W-40, SAE 5W-30, SAE 5W-40, SAE 5W-50, SAE 20W-50, and SAE 0W-2012.
Santa Fe 2.4i CVVT:
Recommended oil type: Not specified in the available data.
Santa Fe 2.7i V6:
Recommended oil type: Not specified in the available data.
Santa Fe 3.3 V6:
Recommended oil type: Not specified in the available data.
Remember to check your vehicle's manual or consult a professional mechanic for precise guidance.
How to remplace the knocl sensor wire
I'm guessing you mean knock sensor wire. If you need just the end of the wire you should be able to order a pigtail from any parts store and just but connect it on
Onity machine error showing no valid data connect to pc , what can i do for that ...
Here are some steps you can take to troubleshoot and resolve the issue:
Connect the Machine to Your Computer:
First, ensure that your Onity key machine is properly connected to your computer. You can use either a USB or Ethernet connection, depending on your machine's configuration.
Be cautious not to damage any of the connections while setting up.
Launch the Access Control Software:
Once the machine is connected, launch the access control software provided by Onity.
Double-check that all the information (such as username and password) is correctly entered.
Select the "Reset" Option:
From the software's main menu, choose the "Reset" option.
You'll be prompted to enter an authorized user ID and password assigned to the machine's operator account.
After verifying these credentials, you can enter the reset mode.
Input New Credentials:
While in the reset mode, input new credentials for the machine.
Set a unique password and click "OK".
Remember this password, as you'll need it each time you use the key cutting device.
Confirm the Reset:
Confirm the reset by clicking "Yes" on the confirmation prompt.
Wait until the process completes successfully.
The machine will reboot automatically after a few seconds.
If you encounter any issues during this process, consider reaching out to Onity Tech Support for further assistance.
How do I turn off this fob ?
Anti-theft is part of the Engine / Body chassis maker equipment and is normally impossible to disable. You have to fix the issue not find a way to work around it.
The controls are ECM, Body Control Module, anti-theft module and numerous sensors.
..
3/24/2024 7:24:27 PM •
Cars & Trucks
•
19 views • 0 helpful votes
2007 Chevy HHR LT 2.2. Replace fuse box housing.
Replace a Fuse: 2007 Chevrolet HHR LT 2.2L 4 Cyl. (carcarekiosk.com) This has a video showing location of the engine fuse box.
Auto Parts by CarParts.com - Right Parts. Right Now.
Chevrolet HHR Repair & Service Manuals (35 PDF's (onlymanuals.com)
To replace the fuse box housing in your 2007 Chevy HHR LT 2.2, follow these steps:
Locate the Fuse Box: The fuse box is typically located in the engine compartment or under the hood. It houses various fuses and relays that control different electrical components in your vehicle.
Disconnect the Battery: Before working on any electrical components, disconnect the negative terminal of the battery to ensure safety.
Remove the Cover: Open the fuse box cover. You'll find a diagram inside the cover that shows the location and function of each fuse.
Identify the Faulty Fuse Box: Inspect the fuse box for any signs of damage or wear. If it's cracked, corroded, or malfunctioning, you'll need to replace it.
Unplug Electrical Connectors: Carefully unplug the electrical connectors attached to the fuse box. Take note of their positions to reconnect them correctly later.
Remove the Old Fuse Box: Unscrew or unclip the fuse box from its mounting bracket. Gently pull it out.
Install the New Fuse Box: Position the new fuse box in place and secure it to the mounting bracket. Reattach the electrical connectors.
Replace Fuses: Transfer the fuses from the old box to the new one. Make sure they match the correct positions as indicated by the diagram.
Test the Electrical Systems: Reconnect the battery and test all electrical systems (lights, radio, etc.) to ensure everything is functioning properly.
Secure the Cover: Close the fuse box cover and secure it in place.
Remember to consult your vehicle's manual or seek professional assistance if you encounter any difficulties during the process.
Where is the fuse or the relay for fuel injector 1
for a 2006 GMC envoy Denali
Fuel injectors are typically driven directly by power transistors in the engine computer. Relays are just not fast enough to provide the fine timing control needed. There might be an individual fuse for each injector soldered to the computer board, but I haven't ever looked at one for your model, and I've never seen injectors individually fused. Before chasing that, verify that the electrical resistance of the injector coil is the same as the other injectors. The typical resistance is between 100 and 1000 Ohms. If the coil resistance differs by more than 10%, replace the injector coil (it may be easier to remove the coil from a new injector and switch it with the old one than to pull the entire injector out and replace it, if not, change the injector). Shorts in the coil that lower the resistance are sometimes a problem.
Also check the injector cable for continuity. An easy way is with an ohmmeter that can read at least 20 Megohms. First, check the resistance between the terminals on a good cable. You should read a very high resistance - this is the leakage through the transistor and any protective components, and is some number between 5 and 20 megohms. The exact number doesn't matter, as long as you see something and it is not a short circuit (less than 1 Ohm). This verifies that the test will work (if it reads over-range, either your probe tips can't reach the contacts in the connector, or the test is otherwise not valid). Next, repeat on injector 1. If it reads open circuit (over-range), check the injector cable (note: an open fuse will give the same result as a broken wire).
2/24/2024 1:00:45 AM •
GMC Cars &...
•
31 views • 0 helpful votes
I can't leave a comment after logging in..
Anywhere in particular? You seem to managing just fine here!
https://www.fixya.com/users/atos-maximus
For some strange reason you are answering Solved questions from August 2012??
..
Not finding what you are looking for?