Where is the fuse on a PL6018UHDS 60” polaroid tv it won’t power on
The fuses are usually inside the set. But fuse failure is rarely the problem. It usually means the set is defective and may need a new power board - or something else. If set is still under warranty take it authorized service or call them to see if they will do service in the home. If out of warranty you will need independent service agency.
If you are technical try googling for common problems and repairs for your model. There may be forums or discussion groups that can lead you to methods of simple troubleshooting for your detailed symptoms.
10/22/2018 7:51:14 AM •
Polaroid...
•
282 views • 0 helpful votes
Cannot turn on closed captioning on remote for polaroid fhd led tv
Do a reset to this TV, and then check. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts.
https://electronicshelponline.blogspot.com/
https://homenol.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done./
9/2/2018 1:04:15 AM •
Polaroid...
•
1,066 views • 0 helpful votes
I have a polaroid television and the sound will not come on
Before you of think about buying or repairing, it may not be the TV. If you are connected to a cable TV or a satellite box, these may need to be reset, or replaced. Try resetting the box. Power off, If the box has a card in it...pull it out first. Now unplug power to box, and wait one minute. Plug power in, then reinsert card and power up. This may take another minute or two. If the box does not have a card, power off, unplug it power for one minute. Plug it in and power on. If this does not work call your service provider and have them test box. Try this. Thanks for asking, Matt of Martins TV Repair.
9/30/2018 6:08:17 PM •
Polaroid...
•
92 views • 0 helpful votes
Not finding what you are looking for?