Polaroid Recent Questions, Troubleshooting Help & Support

Hello, Nicolene -To clarify what you are asking about . . . The SIM card you have for a Polaroid GPS Kid Tracker Smart Wristwatch has been registered by a previous owner? Or, do you mean you registered the SIM card and it does not work with the watch you have?Just in case . . . this is the link to the Installation Guide for the Polaroid GPS Kid Tracker Smart Wristwatch:https://kidssmartgpswatch.com/pages/faqIf the SIM card you are trying to use in the watch was registered previously by someone else, then, you either need to find out how to change that registration or you need to register a new, different SIM card.I suggest you contact the manufacturer and ask your questions:[email protected] the way, your question landed in the Fixya category for Polaroid Cell Phones.Best wishes.

go buy it

Hello my Polaroid tower won’t come on when it’s plugged in. Please help

Request directly from Polaroid

hope it's under guarantee. call repairs or suppliers

The fuses are usually inside the set. But fuse failure is rarely the problem. It usually means the set is defective and may need a new power board - or something else. If set is still under warranty take it authorized service or call them to see if they will do service in the home. If out of warranty you will need independent service agency. If you are technical try googling for common problems and repairs for your model. There may be forums or discussion groups that can lead you to methods of simple troubleshooting for your detailed symptoms.

Replacement Digitizer New Digitizer Touch Screen Panel For Polaroid A900X 9 Inch Tablet PC on Amazon for £21.99

On the rear panel of the TV there's a connection panel with all the input and output jacks. As long as your stereo receiver has RCA type inputs on it, you will be able to hook it up to the RCA AUDIO OUTPUTS on the rear of the TV. Most stereos will have an AUX setting on it to allow the audio from your TV to play through it.

Before you of think about buying or repairing, it may not be the TV. If you are connected to a cable TV or a satellite box, these may need to be reset, or replaced. Try resetting the box. Power off, If the box has a card in it...pull it out first. Now unplug power to box, and wait one minute. Plug power in, then reinsert card and power up. This may take another minute or two. If the box does not have a card, power off, unplug it power for one minute. Plug it in and power on. If this does not work call your service provider and have them test box. Try this. Thanks for asking, Matt of Martins TV Repair.

iPhone is not supported...Or more accurately, Apple doesn't support the Bluetooth send feature. I understand that you can make it work if you jailbreak your iPhone.

is that a question of any sort ? if so, what are you asking about ???

Which model do you have? In general, first make sure that the source is set to TV. Look for a Source or Input button on the TV. On some models, the buttons will be on the back of the TV. On others, the control panel buttons are on the side or under the front bezel. Now, try the Menu button and use the Up/Down arrows to go to the Channel icon. Press the Menu button again. Then use the arrow keys to make sure that the TV is set for Cable or Over-the-Air as needed. Press Enter to change this using the Left/Right arrows. Press the Down arrow to get to the Auto-Scan option and press Menu to launch the scan. Often, the Channel Up/Down arrows are the equivalent of the Up/Down arrows on the remote. The Volume +/- buttons are function as the Left/Right arrows. These directions apply to the Polaroid 19GSR3000; the manual for this is available here: http://polaroidhdtv.com/wp-content/uploads/2013/11/UM_19GSR3000.pdf . You can find other manuals for some Polaroid TV models using the drop-down menus here: https://polaroid.com/support . The Polaroid manuals for TVs from 2014 and later are here: http://polaroidhdtv.com/support/#tab-id-2 . I hope this helps. Cindy Wells