Polaroid Office Equipment & Supplies - Popular Questions, Answers, Tips & Manuals

Hi, Please unplug the device until it turns off. We should also ensure that it's not overheating and then leading to the error that you've just described. If the error occurs again, please ensure that card /id is loaded in the correct orientation and the machine isn't lacking any ink. Otherwise, you might need to return the device to factory defaults. Thank you.

Sorry, no longer compatible due to age.

Try to reinstall the software.

https://polaroid-pogo-app.en.softonic.com/android

My PoGo wont pair with Galaxy S8 Suggestions please

one at a time will be ok nothing with staples or metal should be shredded in the machine

If you have taken a photo and the light is flashing red, you may have a paper jam. Possible reasons why there is a jam could be: more than ten sheets of paper, bent paper, and backwards paper. To fix the jam, remove the paper carefully without damaging the camera and insert new sheets making sure they are oriented correctly and do not exceed more than ten sheets. Also, make sure you are using good quality paper.

There is no such external reset buttons to modern TVs. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

There are capacitors in the power circuits that need to be replaced, may be if you check you can see them leak or swell up. But be careful when replacing, put them in the correct direction and the same voltage and ahmps.

English? Can't help you.

http://www.amazon.com/Polaroid-Capacity-Replacement-Battery-CZA-05300/dp/B006QNNQ5G In stock as of 9-08-14 9am EST USA

How about you check your bank or card statement, or e-mail if the receipt was sent by e-mail.

How was it before ? You can always cancel the old and start A new account.

If you a reasonably handy you could disassemble the battery pack and replace the cells with new NiCad or NiMH units. They are not complicated and you should find lots of sites on the net that will supply the cells. Alternatively if the unit has a DC socket you should find the voltage and current printed beside it. Try fitting a suitable power pack.

What does this mean? "ink roller". I''ve never have never heard the term. Does you mean ink ribbon roll? Why would you need to clean anything with that type?

There is a menu accesible also from the buttons and you can change it there.

Hello. It sounds like the printer head needs to be changed.

Hello my Polaroid tower won’t come on when it’s plugged in. Please help

Hey my camera is having the same problem I was wondering if you ever solved the problem? If you did how?