Polaroid Computers & Internet - Page 3 - Recent Questions, Troubleshooting & Support
Ive retuned, re-set, unpluggest and plugged back in and i recieve no channeks still, been like this for months
What is your TV source? The Polaroid LCD-2000 only has a NTSC (analog) tuner. Most OTA stations switched to ATSC signals a few years ago and a converter box is required to watch the TV. (A few low power TV stations still broadcast in NTSC but you need to be fairly close to the transmitter to receive the channel.) If you have cable, check if they have migrated to digital cable (QAM for unencrypted channels). If that is the case, you'll need a cable box.
With a digital-to-analog OTA converter box, you can still lose station reception due to the signal strength cliff. Depending on your area, you may need an external antenna or to check the direction of the antenna. I know I have to rotate the outdoor antenna every so often. It shifts in high wind. Even if the antenna only moves 5 degrees, we will lose the signal for half of the stations.
I hope this helps.
Cindy Wells
No picture, no sound on polaroid flat screen
Power supply board is not working. There is usually a fuse on the board that you can change, but you need to know what caused the fuse to blow in the first place. There are many places online that sell replacement boards. It's not difficult to open the back of the TV to get at the boards.
Bluetooth disconnects
If the phone is paired to anything else, this can happen. Unpair it from all other devices and try again.
Not finding what you are looking for?