Planar Office Equipment & Supplies - Answered Questions & Fixed Issues

We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel, motherboard, powersupply ... with high quality and competitive price. Jerry Lampdeng Limited

Hey if you go into system prefs > displays > arrangement you can drag the white bar on the top to the other screen you're using (status bar from the top and the dock). Not sure if that's what you're after but may help.

you can find out the type on the DMD chip of your projector Have a good day! We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip,color wheel, motherboard, powersupply ... with high quality and competitive price. Jerry China Lampdeng Limited Tel: +86 131788 67858 E-mail: [email protected] Skype: lampdeng.com YM: [email protected] http://facebook.com/lampdeng http://www.lampdeng.com

most probably the lamp ballast is defective ,you need a new one

you may need to clean it with a soft cloth that should help it may be dust

change the pc screen resolution to a lower value. check the phase setting menu on the projector

Hello,

if it does not power up, then it means its having a power problem. it might have worked fine in the past, but that's electronics for you. Power surge, irregular power supply, excess power supply, etc can affect the unit thereby not making it to power on.

This unit must have a power supply board in it where power enters from the mains. A capacitor, fuse, diode, etc may have been defective on the power board and maybe that's why its not making the unit turn on. There might also be some disconnection or something, inside the unit which is not making it to power on.

To actually find out what's wrong, you need to disassemble the unit with a screw driver and check what's wrong. You will be needing a meter in order to test the components on the power board, once you detect any bad component, you can make necessary replacement at any electronics accessories store withing our vicinity. This is the only way by which you can detect the problem.

Of course, testing the power board with a meter will require someone that has the ability. So it you can't, then you might be needing the help of a repairman or you can call a friend that has the ability to help you out.

I wish you the best of luck.

Take care.

buy a new 1,then look in the menu for it.

try reseting the lamp timer and then replace the lamp if it works

Call your supply company.

The series on the following link includes the model you are asking about. EMERSON FINCOR 2330MKII SERIES EQUIPMENT MANUAL Pdf Download ' ManualsLib

How to set up tax rate on Ativan 12 digit calculator

You posted to the Category 'Cars and Trucks'? shedding? Help in the link https://www.google.com/search?q=Tech+solutions+mod%23+TS8000 All questions need 'make model (what is is)' as first 3 words. Thinking that this might be a 'shredder' gives better results, we also have a Shredder Category, so I moved it. Shredders have an overheat thermal cut out and also a thermal fuse. It may reset itself. https://www.google.com/search?q=Tech+Solutions+TS8000+shredding+no+power ..

Edited for clarity. Full 'make model (what is is )' please first 3 words. Thermal cut out, thermal fuse, or burned out motor. They all have a suggested time limit for running them and is generally 20 minutes unless it is a commercial model and cost $1,200 to $4,000. https://www.google.com/search?q=Tech+Solutions+TS8000+shredding+no+power It looks to be a capable machine, but no parts from 'Shredder Parts dot com'. https://www.google.com/search?q=Tech+Solutions+TS8000 ..

Try "supervisor" as the username (no password).

You should write good resume and then to search vacancies on job boards.

Question edited for clarity.

Canon imageCLASS MF3010 - Error Codes

PrintCopy .info https://printcopy.info > model=imageCLASS+MF3010 Error Codes List page 1 · Code: E000 · Description: Startup failure · Remedy: (1) Check the connectors of the Fixing Assembly. (J101, J1011, J552 and J702) (2) ... ..

your choice of "Vibe" turntable could have not been worse.
Any serious Vinyl collector would not use such a cheap piece of equipment.
You Get What You Pay For is so very true in this case.

No one in North America has Risograph machines. Try this link https://www.google.com/search?q=Riso+EZ+370E+freezes+abruptly+while+printing ..

Question edited for clarity. https://www.google.com/search?q=OCE+error+code+22550+22515 ..