Pioneer Recent Questions, Troubleshooting Help & Support

split the difference and go 32:1 https://www.arboristsite.com/threads/fuel-mixture-for-pioneer-p42.6134/ https://www.google.com/search?q=pioneer+p41+chainsaw+fuel+mix ....

Hi, Please double check that you've adjust the volume on the speaker and test sound with multiple sources (ie CDs, DVDs etc) to ensure that the volume/sound issue is cause by the speaker and not the item that it's attempting to play. You can also check for any disconnected wires going from or to the speaker. Thank you.

HI, I’m Stephen. This works!!!! This saved me $200.00 I am eternally thankful! the key to it is pressing the little reset button. it is very small and only accessable with a pen. If you follow the directions as listed, it will work.


OR


Hi, You set the screen so its all the way down and hold down the dvd eject then the reset button for a few seconds, then let off of the reset button, keep the eject button held down for another few seconds. Then the screen will say press reset. instead using the joystick, press up,up,down,down then push it in at the center. It will come up with options. the first one is touch screen test. using the joystick click on that one and do the calibration test. You will then have to trace the outline of the screen, while you are on the right side of it, trace it short to make up for the buttons on the right side. when you finish push the joystick in. it will say "settings ok" then go down to the 4th one, i think, and it will say something like test calibration settings and go to that one. It should say that the settings were saved. After that shut the key off and turn it back on and it should be good to go.

Have you solved ???? Thanks .. I have the same problem

Hi, please double check that your power source is still working. You might need to replace that or the wires that allows your device to charge. Thank you.

Smash it against the wall then buy a new unit from best buy, they have a great return policy.

I don't have a stand-alone cd recorder but like many people I have burned discs on the computer and had many disappointments. While some disc drives are clearly better than others, for no apparent reason, there does seem to be more reject discs with some software than others. Particularly disappointing is the Nero burning software that performs well when it is first installed but seems to deteriorate fairly quickly with every computer restart. I know nothing about such things so I am only guessing the cause might be that Nero displaces some Windows components and Windows seems to try repairing itself when booting. Like most things these days, especially digital things, your cd recorder is in fact a computer that depends entirely on the software loaded into it, software that could degrade or become corrupted over time. While it is possible the disc drive (laser perhaps) has become less potent it wouldn't be unreasonable to suspect the software and I suggest you contact Panasonic. It is probable, like many things requiring software, early versions were found to have problems and would be periodically updated.

hiKNOW most technical words , as in difference of CARTRIDGE OR stylus (or needle) inside it, are not used clearlyThis page https://audiokarma.org/forums/index.php?threads/purchased-pioneer-pl-950-new-to-vinyl.543166/gives a cartridge substitute: "For cartridges I have seen many recommend the Audio Technica at-95e."Before buyin see- https://www.audio-technica.com/en-us/at95e for the cartridge.A needle only ebay- Enhanced Elliptical Stylus Needle Audio-Technica ATN95E AT95E Cartridge 710-DE

I would check two things... First make sure your wires are not connected in reverse order from the speaker to the cassette deck. Second I would check for a short in the wire between the speaker and the cassette deck. You can do this relatively easy with a fluke meter. That's all I can think of hope it might help

https://www.modifiedlife.com/2007-ford-focus-car-stereo-wiring-diagram/

Actually you can change the color. Turn the Unit off. Press and Hold MC. The menu will pop up, turn to Ilumi turn it to desired color. It only comes in Red or Green.

You are aloud to post pictures of the back of your receiver. It would be easier to explain with pic.

Hello, it should disconnect external speakers when plugging the headphones. Models like vsx456 does come with speakers on/off settings but not vsx323k. You might be experiencing headphones defectiveness or even vsx323k plug being defective.

Question edited for clarity and spelling *receiver (I before E except after C) *message (2 x s) Remove the unit and take it into a Pioneer Service Centre. That Power Loop often happens with overheating or Firmware issues, . ..

Not a fuse for the speakers. There is a protection circuit in the unit that shuts off the audio amp if there is a problem with the speakers drawing too much current.

Unless your a skilled electronic tech and have the test gear to trouble shoot the set don't waist your money trying to fix it. Plasma sets are about 10x more complex than a LCD set

a good good run, most never get that far, never serviced. 1981 actual; using RCA rear jacks mark PLAY? both speakers? L and R>? CD, all CDs low. but is FM radio low too>? there is no CD player there, on board so if FM is ok and AM then your CD player not told is bad. OR????? CDDA real music disks (brick store bought off shelf) or or CD with a bunch of MP3, or WAV or FLAC files? is CD-r disk , SUN wrecked, not kept in dark not used. oops. CD_R are easy to wreck in sun say parked on a window ledge. all mine are good back to the first CD-R ever made and have hundreds here.. buy new BluRay player and it does them all, no more weak laser do not use phono jack or that will put the preamp into saturation or the AGC there to go nuts. use only tape or aux , play jacks phono is only for phonograph weak weak mag cartridges tell what is there all and get better answers can go back 1960s and tubes, sure can. (old as dirt me)

google Remote for Pioneer HTD520, there are several on line. amazon has new one.

Google your service manual and all will be revealed.

It seems that one of the rear lamps burned. Have you tried to open Setup of the TV and raise the level of light?