To program your Magnavox universal remote to your Philips Magnavox FW530C mini Hi-Fi stereo, follow these steps:
Turn on your Philips Magnavox FW530C mini Hi-Fi stereo manually.
Press and hold the "Code Search" button on your Magnavox remote until the indicator light turns on.
Press the "Device" button on the remote, which should be the button corresponding to your stereo.
Enter the 3-digit code for your stereo. You can find a list of codes for Philips Magnavox products in the user manual for your universal remote or online. If you do not have the manual or cannot find the code online, try entering codes 006, 007, 010, 011, 013, 016, 027, 033, 035, 043, 066, 087, 089, 114, 117, 118, 119, 120, or 123.
Press the "Power" button on the remote to see if the stereo turns off. If it does, you have successfully programmed the remote. If it does not, repeat steps 2-4 with a different code until you find one that works.
Once you have programmed the remote to control your stereo, test out the other buttons to make sure they work as well (such as volume control, track skip, etc.).
Note: If you cannot find a code that works for your stereo, you can also try the "Code Search" function on the remote. This may take some time, but it will automatically search for the correct code until it finds one that works.
It could be a lot of things causing the issue, without electronic knowledge it's going to be hard to diagnose, also a 10 plus year old set isn't worth fixing, parts will run more than the set is worth, time for a new set.
The inbuilt speakers are either broken or not working on your TV or the audio amplifiers are missing the supply voltage or the IC audio is not working anymore with your TV or there is an issue with the TV's capacitors.
The EHT number for a Philips TV model 21PT3525/V7 can vary depending on the specific version of the TV. However, the EHT number for this model is typically BSC25-0235 or BSC25-0217.
It's important to note that replacing the EHT can be a dangerous process, as it involves working with high voltage components. If you're not experienced with electronics repair, it's recommended to seek assistance from a qualified technician who can perform the repair safely and properly.
If the leak is under the kettle just replace it with a new one. Water and electricity are a DANGEROUS mixture. There is a VERY high risk of electrocution and of fire if you keep using this kettle. New ones are usually cheap enough for a basic kettle.
English only on Fixya.
Philips TV remote codes. If you have recently bought a universal remote control and you need the remote codes to operate your Philips TV, we have codes below for your TV that should be working. If the first does not work keep trying the numbers down the list.
Philips HDTV CODES
1129
1236
1237
1239
1261
1334
1351
1390
1411
Philips TV Codes
1004
1007
1011
1017
1018
1047
1053
1056
1057
1059
to hack anything google it.
or buy the new CANON tank printers.
Canon , ended printer INK HOSTAGEEEEEE taking
GONE, avoid HP is bliss.
Life is way to short for INK counter malarkey. for sure.
If the television still won't turn on, turn your TV off at the wall and unplug it from the plug socket. Wait 30 seconds, and then plug it back in and switch it on. This is called a 'soft reset' and should recalibrate the TV
Hi Dakota...Unfortunately, most Funai brand sets like this are hard to troubleshoot as there isn't legends on power board to know what pin is what and no service information is available. Generally the fault you're describing comes for a boot error or bad EEPROM that's located on the main board, it's not impossible for a power supply to cause this but it's not likely, another possibility would be bad backlights. On most sets there are markings as to what pin does what and the power on pin can be tested for around 3 vdc but that's not an option on this TV. I'd replace the main board, there is about a 75% chance of that fixing it.
I'd try a different tcon board, if your set doesn't have one replace the main board, if that doesnt fix it chances are really good you have panel issues, and the set isn't repairable
Hi,
please remove any attachments that are on the tv (ie game console, external speakers and attempt to power the tv on again. If that does not work, please check that the tv is powered directly by an outlet and not a power strip. Thank you.
