Pelikan Answered Questions & Fixed Issues

In your owners manual. Page 10 in mine

gamecubes dont have wireless controllers so it wont work unless its wired

The top of the battery nearest the light bulb is the positive connection and is in direct contact with the bulb. The negative connection is a strip of brass that runs along the length of the torch from the bottom (bottom of last battery) to the bulbs side connection.

Actually, one of the (two) metal plate is missing.

Reset the controller by flipping the controller over and looking at the middle of the controller, and closer to the L2 button is a small hole next to a larger one. Unfold a paperclip or something alike and poke it into the whole. Reconnect the controller to the ps3 by using a usb cable and you're done.

The pelican doesn't upscale. If you have yellow white red connecting something to the pelican, you need yellow white red connecting the pelican to the TV, not just component cables.

I don't got an answer but it happed to me to have u got it fixed yet?

there are 2 signs mark ( "+" & "-" ) on batteries flap's innerside, check it and check the signs on batteries as well.now insert the batteries accordingly.

The PSP version of the Pelikan Headbanger Earsubs uses a Mini Stereo Cable. The electronic chip portion of the cable is for powering the subs inside the headphones.

Here is the converter that you need, but it may not fit and doesn't include the power for the subs, only the 1/8" Stereo Male to 2.5mm Mini Stereo Female adapter:
http://www.trianglecables.com/sma3525.html

I recommend either purchasing the version with the block amplifier, or get a good pair of non-powered stereo headphones. I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Hi,

Good day. Regarding your issue about your controller you might need to consider buying a new one.Usually if you need to jiggle or tap the cord to make it work it means that the inside cable or wire is already use. This happens to any device that has a cord or connector due to normal use or plugging it in or out. Hope this information help you.

Tip: Before i sue to tape the end of the connector to make it work. But it's better to get a new one than to have a temporary solution.

The kind of questions are not specific,but i'll try my best to answer.Have you tried new batteries? Sometimes, they mal-function but in a little while,they should be better.Thanks!

Conecte el adaptador inalámbrico. Ponga en el cd con los drivers para el mando a distancia 360. instalar el software. a su vez en el controlador. debería funcionar. Bam.

I can't help you much since i can't physically fiddle with it, but my best guess would be either a damaged USB port or the USB connector on the controller is damaged.

I found this site http://www.roggler.com/rg/index.asp?blogID=56...it helps some but you may have to go in and manually edit .inf file if so just go into device manager find your controller in the dreaded "other devices" section and find your VID and PID numbers and modify the same in xbcd.inf to match. The 360 controller is almost at bottom in the .inf file. I take no credit for any of this except the google searching and modifying my .inf file

Most wireless controllers have a switch on both the sensor and controller which allows you to select a channel, useful for when you have more than one wireless controller. If yours has such a switch, make sure that both the controller switch and sensor switch are on the same number channel.

Hii go to the below link and you will find the complete details on how to connect xbox 360 to the wireless internet along with the screen shots..
http://tinyurl.com/raj321

the L3 button is Left thumstick pressed inward

R3 is right thumstick pressed inward ;P

pls rate .

There should be several USB ports on your 360. There should be one in the back and two in the front lower part of the console. It is hidden beneath a small flap you can push in with your fingers and slide the cable into the usb

Dear Sirs,
Have a nice day.
I am glad to quote the best price for our wii controllers(L&R) is USD16/SET, before formal order, please confirm the price and the Stock Qty with us. Thanks.
We are professional manufacturer of video game accessories, spare parts, memory cards, game controller, game joppad, game joystick, game laser lens, game repair parts. For wii, xbox360, NDSi/NDSL/NDS, PS3 AND PS2, PSP1000 to psp3000, etc.
For more informations, please feel free to contact me by email: [email protected] or add my msn: [email protected]
website:www.topsheung.com www.topsheung.com.cn

Many thanks and kind regards.

Yours faithfully,
Anna

**************************************************
Anna
E_mail: [email protected]
MSN: [email protected]
Gmail: [email protected]
Company :Top sheung electronic Co.,Ltd
Website: www.topsheung.com
ADD: A412 Huafeng Commercial Building, Qianjin Road, Bao'an 25 District Shenzhen,China
TEL: 86-755-27800379 Fax:86-755-27806340