Peg Perego Logo

Peg Perego Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 335 Products
  • 11K Answers

the polarity is reversed on one of the motors, if the gear selecter is in low or high gear the wheels should propell the vehicle forward, whichever wheel is not propelling the vehicle forward switch the wires around on the motor

Peg Perego John... | Answered on Mar 03, 2019

6 screws and one bolt hold the steering wheel on. The screws are obvious but to get to the bolt you need to remove the cover, it is directly above the steering wheel adjustment button, just pop it off with a flat head screw driver. then you can easily open it up and see what broke, call customer service and get the replacement part. I assume your cable broke...mine did too. <!-- from fixya rte -->

Peg Perego... | Answered on Feb 06, 2019

Could be worn or sticking float valve, located in bowl of carburetor. to test turn off fuel, remove bowl from carburetor, gently raise floats all the way with finger, turn on fuel, it should not leak until released.

Peg Perego Vespa... | Answered on Dec 16, 2018

these toys don't have engines, just electric motors

Peg Perego Vespa... | Answered on Dec 08, 2018

check your takn and clean your fuel and air filter and check the fuel line from the tank to the carb and blow it out, 1 of these should help.

Peg Perego Vespa... | Answered on Nov 17, 2018

frankly speaking:
how come you think it is "not a problem" to do such service jobs on a Vespa LX if you are not a mechanic and don't have all the tools required?
- sure you could try it - but you need enough time to check the workshop manual and get the proper tools. (eg. sometimes the nut on the rear axle is stuck and need to be heated by a torch)
- to change the tubeless tire you will need also a tire changing machine which only tire shops or bikedealers have.


Peg Perego Vespa... | Answered on Nov 16, 2018

2% as most Vespas. Some folk like to add a bit more for a tuned engine.

Peg Perego Vespa... | Answered on Nov 16, 2018

- did you ever push the starter button while the engine was running?
if yes, the gear on the starter motor is damaged and needs to be replaced...



Peg Perego Vespa... | Answered on Nov 16, 2018

Sorry we do not have parts here or any locator service to find them.

Peg Perego Toys | Answered on May 09, 2018

Try Googling (Peg Perego)(model)(manual) without parens.

Peg Perego Baby... | Answered on May 05, 2018

Sounds like something is broken inside the handle. The button isn't catching. You could do a few things, quick fix, put a rubberband around the shaft just below the handle when it is extended and it will keep it up high. Better fix, contact Perego and get a replacement handle. If it has been doing this since you purchased it, it may be under warranty. If it is past the warranty period, you can either take the stroller to a Perego repair center near you or potentially replace the handle yourself. Perego customer service could direct you better there. You can email them in the US at:

Peg Perego Pliko... | Answered on Apr 29, 2018

It is on the side of the carb. Look for a large hand knob.

Peg Perego Vespa... | Answered on Apr 23, 2018

I have a PDF copy of the Mamas and Papas Freestyler manual Please post a message here with your email address and I can email it.

Peg Perego Baby... | Answered on Apr 04, 2018

All Vespa's old or new run without need of lead as your engine internals are lubricated by either the gear oil or 2 stroke oil.

Peg Perego Vespa... | Answered on Mar 06, 2018

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Peg Perego Experts

Jennifer Rock
Jennifer Rock

Level 2 Expert

149 Answers


Level 3 Expert

84027 Answers

Tom Chichester

Level 3 Expert

50952 Answers

Are you a Peg Perego Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides