Panasonic Televison & Video - Page 8 - Recent Questions, Troubleshooting & Support

Question edited for clarity, full 'make model (what it is). Question moved to Panasonic model category. It is a good set, get it fixed professionally. This is generally the outcome for self repair. https://www.fixya.com/support/r29790007-repairing_own_television ..

http://www.badcaps.net/forum/showthread.php?t=25029 http://www.badcaps.net/forum/showthread.php?t=25029

https://www.manualslib.com/manual/835783/Panasonic-Tc-P50s2.html?page=17 https://www.google.com/search?q=Panasonic+TCP50S2+7+blink+code and finally, what normally happens https://www.fixya.com/support/r29790007-repairing_own_television ..

Are you sure its not 7 blinks then a pause and 7 more as according to the service manual the blink codes for a TV like yours only goes to 12

Hi,

Based on the information provided, I understood that you're using the HDMI cable for viewing the videos from the VHS Tape. It is not recommended to view the VHS tapes using the HDMI cable, as the HDMI cable is the High-Definition cable and the VHS tape is playing back the analog videos recorded in the magnetic tape. It is always recommended to use the AV (Yellow-Video, Red and White-Audio) cable for viewing the VHS part of the Combo unit.
The black bars appear at the bottom of the video may be due to the distorted tape or the dirt in the head unit. This can be adjusted using the tracking option in the VCR.

Please feel free to get back to us for further assistance.
Thanks for using FixYa.

The KX-TGA410 is a handset for several Panasonic cordless phone systems, including the KX-TG411X. (X indicates the original number of handsets sold with the phone system.) Is the answering system set for "Greeting Only" or did you turn off the ringer? If you have set the system to greeting only, with the phone in standby mode (no calls in or out), press Menu # 3 0 5 . This accesses the Caller's Recording Time. Use the Up/Down arrows to select a recording length. Press the soft key for Save the selection. The options are "Greeting Only", "1 minute" and "3 minutes". Press Off to exit the menu. See page 36 of the manual: https://www.manualslib.com/manual/771326/Panasonic-Kx-Tg4111c.html?page=36#manual Alternatively, you can press Menu and navigate to Answering Device > Settings > Recording Time. Use the Up/Down arrows to reach an item in the menu and the press Select (same soft key as Menu) to enter a sub-menu. See https://www.manualslib.com/manual/771326/Panasonic-Kx-Tg4111c.html?page=22#manual . If the ringer volume on the handset is set to zero (off), go to the Initial Setting > Ringer Settings > Ringer Volume from the handset. Alternatively: Menu # 1 6 0 . For the base, just press Volume +. The manual for this system is available at ManualsLib: https://www.manualslib.com/manual/771326/Panasonic-Kx-Tg4111c.html . I hope this helps. Cindy Wells

Hi Ted, this set is made with LG engineering and has backlights that have a really high failure rate, also they regulate the inverter section of the power supply way to close, as little as one bad button lamp will shut it down, if you replace the backlights there is about a 99% chance it will work again, also update software after installing the new strips as this extends the life of the new lamps

contact to compiter

This is a very common issue with this model TV, you have bad capacitors on the power supply board, try this first, take a blow dryer and set it by the heat fins on the back of the set, turn it on for about 10 mins, plug the TV back in and there is a good chance it will work again and keep working as long as it's not unplugged. The correct way to fix it is replacing the 3 defective caps in a row towards the bottom of the board, I don't have the numbers but if you want to replace them I can get you the numbers but that involves soldering skills and purchasing new capacitors (new ones can be purchased at digikey.com) last option is replace the power supply board if you can find one. Do NOT buy a board from ebay unless you want another defective board. Hope this helps

Your not able to do that

Increase the volume on the TV and/or your connected media device (streaming player, Blu-ray player, cable or satellite box, etc.). Check the audio settings on your TV and connected devices. Turn off and unplug your TV and connected devices. Inspect the TV cables and ports, then check the ones on your devices as well.

1. Check Mute. Make sure the sound on your TV isn't muted. Push the Mute button on your TV remote. ...
2. Adjust Volume. On your TV remote, use the Volume Up/Down buttons. ...
3. Sound Menu. Push the Menu button on your TV Remote.

Hi , If its a 2009 Blu-ray player why you don't call the warranty ??
Regards
Dario

https://elektrotanya.com/panasonic_nv-m7.pdf/download.html Please visit this link to download its service manual in pdf. It will have all the details you want to know. If you wish to get some details; check the sites linked here. https://elektrotricks.blogspot.com/ https://electronicshelponline.blogspot.com/

bad convergence board

The captioning comes from your digital box. Look for the button on the remote. As you recorded it with captions, not sure if you can remove after recording, but worth a try.

Hi Jimbo, generally this issue is from defective LED lamps, the inverter is shutting down because of over current because of shorted LED's. All the main board knows (the board that issues the error codes) is the inverter shut down, it has no way of knowing why.

Question edited for clarity. Question moved from Cars and Trucks category. https://itstillworks.com/do-panasonic-dvd-h02-error-7406041.html and also https://www.howtomendit.com/answers?id=54649 I would also suggest using a DVD cleaning Disc which has small brushes that clean the tracking and reading optics. The are inexpensive and can be obtained from Walmart or Amazon. https://www.google.com/search?q=Panasonic+DVD+rv26%2C+HO2+error ..

Put DVD in the drive on laptop/computer. Insert SD card in card reader in laptop/computer. Open "my computer" or whatever your operrating system calls it. Drag and drop contents of DVD onto SD card and wait until complete.

set 3 en pantalla blue-ray panasonic preciono tecla ok y numero 3 y sigue sin funcionar que ago ???

Is your recorder hooked up to the new convert box for digital antenna reception?
I am currently researching the convert boxes for my dvd recorder. I found that some dvd recorders already have digital converter boxes already installed. This might be the case for you.