Check the power source: Make sure that the DVD player is properly plugged into a working outlet and that the outlet has power. Also, try using a different power outlet or power cord to rule out any issues with the outlet or power cord.
Check the power switch: Make sure that the power switch on the DVD player is in the "on" position. If the switch is in the "off" position, the DVD player will not power on.
Check the batteries: If the DVD player is battery-powered, make sure that the batteries are properly installed and have a sufficient charge.
Check the fuse: The DVD player may have a fuse that protects the device from power surges. Check the user manual for instructions on how to check the fuse, and replace it if it's blown.
Check for any physical damage: Inspect the device for any visible damage such as a broken power cord, bent power pins, or damage to the power switch.
If none of these steps resolve the issue, it's likely that there is a problem with the internal power supply or other components of the DVD player, and it's recommended to contact the manufacturer or a professional technician for repair.
When a Panasonic Blu-Ray recorder (DMR) shows "BD 1" "BD 2" or "BD 3" on its display, it means the remote control is not paired with the correct device. To change the channel the remote control operates on, you need to hold the "1", "2" or "3" remote control buttons simultaneously with the "OK" button for more than 5 seconds. If you want to change the channel of the device, you need to go to the "configuration" options and change the device to "BD1", "BD2", or "BD3
There are a few possible reasons why you may be experiencing black and white video when playing DVDs on your Syvania SSD803 DVD/VCR combo. Here are a few things you can try to troubleshoot the problem:
Check the video settings on your TV. Make sure that the TV is set to display color and that the correct video input is selected.
Check the cables. Make sure that the cables connecting the DVD/VCR combo to the TV are securely plugged in and that they are in good condition. If the cables are damaged or loose, they may cause the video to be distorted or not display at all.
Check the DVD/VCR combo. Make sure that the DVD/VCR combo is set to output color video and that all of the connections are secure. If the DVD/VCR combo is not set to output color video or if the connections are loose, it may cause the video to be displayed in black and white.
Check the DVD. Make sure that the DVD itself is in good condition and that it is compatible with the DVD/VCR combo. If the DVD is damaged or is not compatible with the DVD/VCR combo, it may cause the video to be displayed in black and white.
If none of these troubleshooting steps resolve the issue, it is possible that there is a problem with the DVD/VCR combo itself. In this case, you may need to have it repaired or replaced
the easy way is just google your tv how to do this set up is found on you tube you google search your tv then free view re-tune on you tube then scroll down to it.
There should be a small hole located on the face or on the side of it. Use a paper clip to stick in the hole. You will have to straighten the paper clip first.
Press and hold both the ENTER and number 3 buttons at the same time for at least two seconds and, Hey Presto!, you have regained full control of your unit!
These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience.
Fault to the main power supply regulator section. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
If you only have the handset, if I remember, you have to unregister it from the base that was paired with it. If you haven't got that base unit, you are stuck.
The standard reset is to remove the battery for a couple of hours.
Your DMR is telling you that it is set to listen for RC2 but your remote is transmitting RC1.
Two choices for a fix:
1. Put the remote back into RC2 mode by simply holding both the ENTER and 2 button for at least 5 seconds.
OR
2. Reconfigure the DMR to listen for RC1 by going into the function menus and selecting SETUP. Look for the remote control option. Change it to 1, it will currently display the value 2.
