Panasonic Audio Players & Recorders - Page 3 - Recent Questions, Troubleshooting & Support

The buttons on this machine are gated with a mechanical mechanism (under the buttons in the machine -= you can't see it) that acts as a "gate" to control how the buttons behave. This mechanism is probably stuck and needs to be looked at by someone with mechanical inclination - short of calling customer service for service locations. It shouldn't be that expensive to fix. Good luck.

Question edited for clarity, add maker. Question moved from Washing Machines category. It needs professional repair unless you have a background in component electronics. https://www.google.com/search?q=sa-vk960 ..

There are several things that could be wrong. The unit has seperate amps and filters for each section and is high powered at 300 Watts. A fliter may have failed or the amp may have failed. This is something that requires special tools and training to troubleshoot and repair.

Connecting the audio between the cable box and the TV is easy, if you are using one of the composite or component video inputs. Just plug in the associated R/L audio jacks in a line with the video input. If you are using the HDMI input, that carries sound on the HDMI cable. You don't need to connect the audio out of the cable box to the TC-P50C2. See the connections page of the TV manual here: https://www.manualslib.com/manual/246619/Panasonic-Viera-Tc-P50c2.html?page=12#manual . Then set the TV to this input. However, the Panasonic TC-P50C2 does not have an analog audio output. You could try connecting the cable box RCA audio out to the Bose Wave system. You will need a RCA M/M to 3.5 mm adapter cable. (Alternatively a RCA M/M to 3.5 mm F converter and an AUX (3.5mm M/M cable or a 3.5mm M to RCA F/F adapter with a standard RCA audio cable will work between the cable box and the Bose ) This may not have the audio sync correctly with the video. The alternative is to use a digital to analog audio converter and one of the above RCA to 3.5 mm solutions. Get an converter that has an optical digital audio input and an optical audio cable (Toslink). (The cable isn't always sold with the converter.) (https://www.manualslib.com/manual/246619/Panasonic-Viera-Tc-P50c2.html?page=50#manual ) See some converters here: https://www.amazon.com/DA-Converters/b?ie=UTF8&node=3224445011 . I hope this helps. Cindy Wells

i need the following components nos. 1) power output ic no. 2) power outputput capacitor no. and 3) main board no.

Hello Zubair, to connect your phone to the SA-AK 67, you need a cable that has two RCA connectors (White and Red) to a 3.5mm stereo jack The RCA connectors, you connect them in the AUX input that is on the rear panel of the SA-AK67 and the 3.5mm stereo jack, in the headphone output of your phone You select Aux on the Panasonic, you play something on your cell phone and you're done I hope you find the information useful Greetings Franco Dosil Hola Zubair, para conectar tu tel?fono al SA-AK 67, necesitas un cable que tenga dos conectores RCA (Blanco y Rojo) a una ficha 3,5mm est?reo Los conectores RCA, los conectas en la entrada AUX que esta en el panel trasero del SA-AK67 y el conector 3,5mm est?reo, en la salida de auriculares de tu tel?fono Seleccionas Aux en el Panasonic, reproduces algo en el celular y listo Espero te sea util la informacion Saludos Franco Dosil http://www.usersmanualguide.com/panasonic/cd_stereo_system/sa-ak57 http://www.usersmanualguide.com/panasonic/cd_stereo_system/sa-ak77

Hi, please move your device to a different outlet and attempt to run it again. This ensures that your outlet is not the issue. Also, please ensure that your device is running in the correct range of temperature as recommended by the manufacture. Thank you.

F61 is a secondary power supply issue causing the mechanics to jam up or the CD mechanism has jammed causing this message.

I had the same issue and it turned out to be 4 bad 22 uF capacitors on the main board. I made a how to video here for anyone else with the same issue. https://youtu.be/INQLUGuHHFI

I had the same issue and it turned out to be 4 bad 22 uF capacitors on the main board. I made a how to video here for anyone else with the same issue. https://youtu.be/INQLUGuHHFI

I had the same issue and it turned out to be 4 bad 22 uF capacitors on the main board. I made a how to video here for anyone else with the same issue. https://youtu.be/INQLUGuHHFI

I had the same issue and it took a while but figured it out. There were 4 bad 22 uF capacitors on the main board and replacing them fixed it for me. I made a video here and hope it helps anyone else with this issue. https://youtu.be/INQLUGuHHFI

There are four surface mounted caps, 22uf/10v under the surround processor PCB on the main PCB.
Just replace them all.
That took care of my static problem.

F61 error is related to speakers connections, as you said. In most of these cases the problem is not in - out of face but cross-wired points at the cable. So pleace check again ALL the cables for worn-out points that could cause cross-wired. If it's possible use a multimeter and check the resistance at each speaker's end (at the amplifier side). It has to be between 6-12 OHM.

In case of a problem or clarification, don't hesitate to post me a reply.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Thanks and regards
Please kindly rate this solution
Stelios
direct FixYa link: http://www.fixya.com/users/technical114

The SB-HWA520 was sold as part of the SC-HTB520 home theater system. I found a manual for the entire system here: http://panasonic.ae/en/manuals/SC-HTB520.pdf . The wireless sub-woofer pairs to the main unit (SU-HTB520) with a digital transmitter that docks on the main unit. As far as I can tell there is no way to connect the SB-HWA520 without the transmitter and a main unit with the compatible docking port. See pages 7 and 17 of the manual for the pictures of the digital transmitter dock and its setup. I wish that I had better news for you. Cindy Wells

the ic controlling the volume must be faulty

Google for "Panasonic SC-BT200 Region Free

Also see

"http://www.avforums.com/forums/blu-ray-players/885440-blu-ray-player-multi-region-hex-codes.html"

Some Blu-Ray players will need a hardware mod to be region free.

I would look on fleabay or amazon.

https://www.manualslib.com/products/Panasonic-Sc-Akx12-3198048.html

no descodifica dts a traves de opt2 solo de su dvd opt1