Optiquest q71, display settings tied to user profile
Boot into safe mode ...not sure what windows version you have but Google boot with safe mode with windows version windows 10, 7 XP etc
You should see the bios before windows loads. If it turns black when windows is loading bad DIsplay settings or driver.
DRIVER FOR SPEAKER
Speakers don't require software drivers. However, the actual unit that makes the noise in a speaker is also called a driver.
No rgb input signal helpppppppppppppppp
If you can get access at the back of your monitor look for the I/O board. This board is where the antenna and audio/video input are pack in.
Just check for the socket loose connection. Lock properly the connectors and resolder loose terminal connections in the I/O board
How to install monteror Q19wb without a CD
1. A lot of Laptops will be able to detect your monitor as a plug and play device.
Try hooking up the monitor to the laptop's VGA (Blue port with 15 pins in three rows of 5). You will need a vga cable to do this.
Once the monitor is connected and both devices are powered on check your laptop keyboard for a key or button with a picture of a monitor or CRT/LCD written on it.
Often this will be a secondary function key. (On my laptop you switch displays by hitting the Fn key and F8)
-
2. If this doesn't work you may have a problem with the video card and might consider sending it to the manufacturer for repair or getting a replacement (not a novice task)
If its still under warranty you can probably send it in and get the LCD or Video card replaced.
I see that this post is quite old, and you have probably found an alternate solution by now, but I hope that you or someone else finds this information useful.
Not finding what you are looking for?