Onkyo Audio Players & Recorders - Page 5 - Answered Questions & Fixed Issues


First question with electronics, especially computers is what happened last before it stopped working. Have you tried allowing it to cool and unplugging everything from it?

Onkyo Audio... | Answered on Jun 20, 2018 | 99 views


Any onkyo AV amp remotes can work well .
I use onkyo TX-SR600 remote to control RZ800.
It works so far so good. A remote for SR807
works well in SR333 also.

Onkyo Audio... | Answered on Jun 13, 2018 | 56 views


Westnet Broadband 1800383368 Support Number Australia For Broadband Support
Alike other Broadband services some kind of errors are very common in Westnet Broadband which occurred occasionally. Amongst all the Broadband Westnet is one of the efficient and most famous Broadband Service Provider. There is Hundred number of Broadband service across the world and a large number of the user using the Broadband service. Users have no issue with this Broadband service. Some kind of basic issue occurred in Westnet which are given below-
    ?•Broadband Service
    •DNS Service
    •Webhosting
    •VPN
    •VPDN
    •IBC and Dial-Up
    •Colocation Service
    If any other account creation related issue occurred in Westnet then just Dial Westnet Broadband Support Number. If the user face any problem Westnet Broadband our expert told you how you can solve your problem.
    For More Details Call on WESTNET Broadband Support Number Australia
    1-800-383-368
    Or Please Visit http://faylyn.forumcity.com/viewtopic.php?p=7496#7496
    https://help-desk-australia.site123.me/


westnet image-pkpebuy3is2j53obe5gyfta1-4-0.jpg

Onkyo TX-DS474... | Answered on Jun 06, 2018 | 187 views


The receiver should do that itself, but you should be able to manually check for one. Then update as needed.

Onkyo Audio... | Answered on May 14, 2018 | 113 views


No any change between inputs. Very easy to fix.
Search SR600 Capacitor replacement on you tube and send an email to me. I will tell you how to fix. Asking Onkyo to fix costs you 110USD or above. Why? They replace the related circuit board. DIY-FIX costs you less than 15USD. Whether you want to fix it, of course, depending on you.

Onkyo Audio... | Answered on May 03, 2018 | 54 views


Though you have not given us the make and model number of that I receiver if it is turning off when you power it up and turn the volume up this usually indicates a problem with the internal amplifier it most likely is damaged

Onkyo Audio... | Answered on Mar 28, 2018 | 37 views


take it back to the store and get a working one.

Onkyo Audio... | Answered on Mar 26, 2018 | 212 views


Same situation as this. V means DC protection.

http://www.fixya.com/support/t26859458-need_help_onkyo_tx_nr636_cuts_off_as235c75ae-0611-4ecd-b799-2e12c2784c09.jpgforum-zzw53jh0vnu5wdtpskq2i21s-4-2.jpgforum1 -zzw53jh0vnu5wdtpskq2i21s-4-3.jpg819279_200_200-12hrymc5q4xy5bipfulaagnc-1-3.jpg819280_200_200-12hrymc5q4xy5bipfulaagnc-1-5.jpg819279_200_200-12hrymc5q4xy5bipfulaagnc-1-4.jpg

819280_200_200-12hrymc5q4xy5bipfulaagnc-1-5_0.jpg

Onkyo Audio... | Answered on Aug 20, 2018 | 2,651 views


Very unlikely. Probably different codes and DRM are used in newer generations

Onkyo iPod 4th... | Answered on Mar 03, 2018 | 242 views


when i connect left front speaker it's shuts down .
That is probably due to protection caused by either
DC or over current. This means your troubleshooting is not complete.
Preform these steps.
Download SR605 service manual.
(a)unplug the amp.
(b)Connect left speaker (c)remove the vertically installed pre-amp board.
See this:
How to do?
1.Unplug the amp.
2.Remove the metal cover.
3.You will see a long vertically installed pre-amp board mounted next to those large power transistors fixed by 12 screws on a large aluminium heat sink.
4.Remove this long vertically installed board mounted by 2 screws.
5.With 2 screws removed, just pulling this board out and hold it with one hand.
(d)Plug the amp and switch it on.
(e)If your amp stays ON forever, the problem is from this long board.
(f)If switch off at once, the problem is from power amp board.
Try the above- mentioned steps to confirm DC or over-
current in left channel.
(g)For DC protection, replace ALL components on left channel of the vertical board.
(h)For over-curremt protection, replace ALL components on left channel.

Replacing ALL components on a faulty channel do not cost you too much.

20bc90e6-2c2b-40c3-ba5f-413834b01086.jpg


power amp-fkn3yornxvv0r5asupq1xmgq-3-2_0.jpg

Onkyo TX-SR804... | Answered on Mar 06, 2018 | 145 views


This is a problem of DSP. If enter service mode,
You will see a picture like this. You can do nothing
Except selling this amp cheaply. This DSP ??????
Causes NO SOUND in all channels. Besides, never
Buy 2nd hand onkyo from 5/6/7/805 to 5/6/7/848Series amps. You will suffer the consequences!!!!

dsp problem-cul4vjmzkuvncverhuthjcbk-4-0.jpgdsp-1-uogyjvcdpkwkvogd1g1ztygl-3-2.jpgdsp1-uogyjvcdpkwkvogd1g1ztygl-3-3.jpg

vertical board removed-uogyjvcdpkwkvogd1g1ztygl-3-4.jpg


20180903_212200-ehzympxeirecuoiodxxa0sue-4-5.jpg

Onkyo TX-SR606... | Answered on Mar 06, 2018 | 1,046 views


Probably the motor is defective.

Onkyo Audio... | Answered on Feb 13, 2018 | 122 views


It might time out after a period if inactivity.

Onkyo Audio... | Answered on Feb 01, 2018 | 685 views


605 does not support ARC. My old 807 doesn't support either. My Rz800 does.

Onkyo Audio... | Answered on Jan 29, 2018 | 218 views


Previously it had turned off while watching a program, however now it cuts off as soon as I turn it on. This must be over-current protection.How to check: (0)download TX-NR636 service manual which doesn't teach you how to fix over-current protection.See P.11(1)Press display and at the same time Press ON/STANDBY TWICE(2)press home(3) I (over-current)-- 25(temperature in my amp)--42(volume level in my amp)--OA(listening mode in my amp)shown.()shown may be different in your amp. For me: -___25___42___OA. In normal condition, NO WORD in left giving you this "-"__25 instead of alphabet.How to fix over-current protect.Symptoms:time taken to shut down.3 seconds (DC protect) OR immediately shut down (Over Current protect) If over-current protect do thefollowing steps(O)unplug the amp.(1)download NR636service manual.(2)open the amp metal cover.(3)measure 7 large white resistors resistance loacated next to power transistors mounted on a large heat sink with black probe touching the middle pin and red probe to first/left or third/right pin.(4)If this 3 Pins large white colour 0.22ohm x 2 resistor is open with infinity ohms ,(5)replace it and jot down this channel for example left surround faulty. Usually only 1 channel went faulty.(5a)When the white resistor didn't burn, "2 channels" were damaged due to bad soldering joint of the large white resistor, however. (5b)When this happened, time taken of shut-down due to over-current is 3 seconds NOT immediately.(6)the two large power transistors next to this white resistor 0.22 ohms x2 should also be replaced.(7)plug the amp(8)switch it on(9)if ok, troubleshooting get done(10)if not ok(11)replace ALL the components of this power amp channel except these in 11a.(11a)P.30 use left channel as an example. R6140,R6150,C6050,R6160,Q6070,R6430,L6000,R6170,R6180,D6000.(12)pre-amp section no need to check.remember if not OK, the replaced 0.22ohm x 2 resistor and 2 power transistors maybe shorted again. Check them first. If OK, replace ALL Components in this channel except 0.22 ohm x 2 and 2 transistors. 0.22 ohm x 2 means left and middle pin 0.22 ohm as well as right and middle pin also 0.22 ohm that are 2 pieces of resistors with 0.22 ohm in a large white 3 pins resistor.Remember sometimes the0.22 ohm white resistor is normal. If so, use a digital multimeter to measure the be bias transistor voltage via multimeter diode test function. You can compare the normal value,580mV to 650mV with faulty one,3.2mV. And the CE resistance is 1.8ohms only instead of 3 Mega ohms.5ec35b57-69c4-4565-931d-6050dd376171.jpgpower amp-fkn3yornxvv0r5asupq1xmgq-3-2_1.jpg

819280_200_200-12hrymc5q4xy5bipfulaagnc-1-3.jpg


819280_200_200-foabr2xlbcyftef3uujtftnm-4-3.jpg


819279_200_200-foabr2xlbcyftef3uujtftnm-4-5.jpg


819280_200_200-foabr2xlbcyftef3uujtftnm-4-3.jpg

Onkyo Audio... | Answered on Jan 15, 2018 | 1,137 views

Not finding what you are looking for?
Onkyo Logo

Ask a Question

Usually answered in minutes!

Popular Products

Top Onkyo Audio Players & Recorders Experts

Ted28

Level 1 Expert

5 Answers

 Grubhead
Grubhead

Level 3 Expert

5686 Answers

The Knight
The Knight

Level 3 Expert

76100 Answers

Are you an Onkyo Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...