Onkyo Audio Players & Recorders - Page 3 - Answered Questions & Fixed Issues

https://www.fixya.com/answer/answerpageslideview.aspx?ctg=mine&fml=0&brd=0&thid=29861928

https://elektrotanya.com/onkyo_tx-sr343.pdf/download.html

If you want to DIY, send an email to me at . This email will be deleted after 1 week. It is a very commonfaulty found in onkyo av-amp, very easy to get fixed,however. I won‘t tell you here. Why? I buy faulty av-amp to repair, selling them on the web!.

http://www.onkyoindia.com/servicecenter.html https://www.tomsonelectronics.com/pages/contact-us https://elektrotanya.com/onkyo_tx-nr737.pdf/download.html

There will be no sound unless a Dolby Pro Logic or similar audio signal is in use. CD/DVD, broadcast etc.

Have you tried unplugging it? If you have and it still doesn't work try resetting it, you can look up how to reset it, on google, i've had to do this before

All such devices remember the last settings. It is the way they are made. Stand-by normally only works from the remote. Owner's Manual https://www.manualslib.com/products/Onkyo-Ht-R570-18093.html Here is your service manual https://www.manualslib.com/manual/1055398/Onkyo-Ht-R570.html#manual https://www.google.com/search?q=onkyo+ht-r570+specs ..

Normally dirty dusty optics. Buy a CD player Cleaning disc. It has little brushes that clean the tracking and reading optics.

Hello, I am sorry about your issue. I suggest that you contact Onkyo product support at 800-229-1687 option #3 so that we can troubleshoot with you. Thank you, Onkyo USA.

Replace ALL faulty components, not just the output transistors because other components may be damaged as well.

search for a good local amp repair service.

The manual for the tx-8211 says that the total impedance for when you have both A and B speakers on are 8 ohms before it goes into protection mode. So look on the back of the speakers and read the impedance and add them up for that side of the speakers. You can wire them in series and it should fix them. I know this is a tad bit late by yknow two years but I’m bored and have nothing else to do.

https://www.intl.onkyo.com › ...PDF
Preamplifier - Onkyo

use warranty if as you say NEW

Stuck on Recovery Net issueSolution : Plug in an ethernet cable

HOW CAN I RESET ONKYO TX-DS555 PLEASE

This is an easy fix if you are somewhat handy.... The belt for the door/tray is slipping. If you remove the enclosure and face plate, you will see two motors below the disc drive. Press eject while observing the pulley to the left. You should see the problem with the motor shaft spinning and the belt slipping. Replacing the belt is possible without any further dissassembly. Simply bend some light wire into an L shape and you should be able to hook both pulleys and lace the new belt on. As far as obtaining a new belt I decided to do the simple thing and use a slightly smaller rubber band. The repair has held now for almost three months and the player is used everyday. Good luck.

There's a fre service manual here, you need to join tte site (free) Onkyo TX SV727 Manual AV Control Receiver HiFi Engine

since we are in the usa we would not have information about stuff in cape town sa

You would need a universal remote control to accomplish this