Omega Tools & Hardware - Others - Recent Questions, Troubleshooting & Support


You could have a shorted gas valve.

Omega Trane... | Answered on Apr 20, 2017


It's very difficult. All of them are cheats.

Omega Tools &... | Answered on Sep 27, 2016


Hi friends, Nowadays lots of people are trying to making the best. Most of them are in fact the adsense primarily. But due to some reason people get banned by adsense can opt for bidvertiser because bidvertiser is the best alternative to the adsense. So I am guiding the newbie how to create a bidvertiser account outlined in this article.


http://crack-serials.com/avira-antivirus-pro-key/

Omega Tools &... | Answered on Sep 17, 2016


when you order software on line the details will tell you what operating systems it is compatible with
so it the details say win xp , vista,7,8 but doesn't list win 10 the software will not work on win 10 system

Omega Tools &... | Answered on Sep 12, 2016


Unless your pressure washer is specifically designed to use hot water, the answer is no. They are not intended for hot water and this can damage the pump.

Omega Tools &... | Answered on Sep 05, 2016


Give it a thorough cleaning.. if it still does not fire you might have to replace the spark plug.

Omega Paslode... | Answered on Jul 29, 2016


Paslode with no spark could be one of a couple of things. First, is the tool clean? These tools are notorious for failing due to the amount of sludge that builds up inside the tool from use. If you are cleaning the tool yourself, you should make sure the wires leading to the fan unit are not getting kinked or pinched during reassembly. Lastly, the tool needs a new spark unit. One way to test this out is to remove fuel and get ear close to rear of tool for a test shot. If you hear the click of the spark plug then the spark plug is fine and chances are that this tool needs to be cleaned.

Omega Paslode... | Answered on May 18, 2016


There appears to be a broken/ missing spring under the button that is causing the fault. Probably best to have a agent for the machine carry out the repair as a hire shop will only repair at the least possible cost.

Omega Rotozip... | Answered on May 25, 2015


Hi Ady,

Judging by all the different batteries work in other tools, my guess is that the circuit board has failed. If you feel up to it, you just need to solder a new one in. If not you need to weigh up the cost of having done and the cost of a new tool?

Regards
Alex

Omega Paslode... | Answered on Dec 01, 2014


Have all the nails been cleared out of the tool where they were jammed? If not take the fuel cell out of the tool, and remove the battery before working on it. If still persists come back to this website for further help.

Omega Paslode... | Answered on Sep 24, 2014


Hi there,

Has the tool been striped down and cleaned lately? And are you using genuine paslode gas? If not, do these two fixes first and try again.

Omega Paslode... | Answered on Sep 22, 2014

Not finding what you are looking for?
Omega Logo

96 questions posted

Ask a Question

Usually answered in minutes!

Top Omega Tools & Hardware - Others Experts

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

2008 Answers

Marvin
Marvin

Level 3 Expert

85020 Answers

The Knight
The Knight

Level 3 Expert

76060 Answers

Are you an Omega Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...