It's a little tricky but with a small eyeglass screwdriver and some super glue you can do it. I had the problem, here is what you do. 1 romove the five screws two on bottom NOTE one of the bottom screws is longer than the rest. two on side one on other side. 2 gently
remove housing, 3 then remove chrome ring that
surrounds three sides of
camera. 4 inside there are four screws
remove them and
separate camera. there is a small metal clip that came unglued you can see where it belongs you must gently turn the wheel till the retainer is all the way to the left away from wheel.the clip goes under the shaft use a little super glue to glue it back. the hardest part is the screen plug lift up black piece line it up
and then lock the black piece down it took me about an hour and a half.even with my fat sausage fingers. if you shoot me an e-mail with your phone number i can walk you through it.
[email protected] good luck