OEM Logo

OEM Popular Questions, Answers, Tips & Manuals

Do you work here? Claim your company

  • 304 Products
  • 2K Answers
  • 185K Views
0helpful
1answer

My android tablet pc will not stay connected to wifi for more than a few seconds. I have changed the router channel, rebooted the tablet, turned the router off, and even downloaded wifi apps. None of

Software Issue An intermittent connection could be caused by a software bug or misconfiguration on the tablet itself. Try disconnecting and reconnecting to your network, as this can help to improve signal strength. You should also look to update your device's software if possible, as major tablet manufacturers often release new firmware with the intention of fixing bugs and improving performance. If this does not work, consider backing up your device and resetting it to factory defaults.
12/21/2017 7:48:03 AM • OEM Tablets &... • 58 views • 0 helpful votes
1helpful
1answer

2003 toyota Rav 4 shifts really hard between 2nd and 3rd gear...automatic transmission

run the fault codes to check for problem solenoid/servo change the transmission oil check transmission oil pressure setting
8/31/2016 9:00:15 PM • TRANSMISSION... • 298 views • 1 helpful votes
0helpful
1answer

1995 dodge van stalls. Then will restart later. Seems like an ignition shut off?

It could be an overheading situation with the ignitor coil or the spark arrestor. I have seen this on Chevy Vans as well. You won't see smoke, as it will just overheat internally and create a break in the electric connections.
9/6/2016 7:32:41 PM • OEM 1995 Dodge... • 106 views • 0 helpful votes
1helpful
1answer

I have 2005 Audit TT and the after the battery was replaced - the radio is locked. Instructions say to push RBDS+ AS buttons but I don't have a RBDS button. Which bottoms should I use?

I assume you have the code. Press the rds and scan up button together. Safe should go off the screen then enter your code. The buttons are on the right side of radio...one above the other.
8/18/2016 1:59:47 PM • OEM 2000 Audi A4... • 53 views • 1 helpful votes
0helpful
1answer

My speed meter and radio is out what fuse is it for them

first figure out what part has blow the fuse before replace it take a little lamp over the 2 fuse conntacts in serial connexion to figure out what device makes the high power consumption, there can be something shorted or have a little motor that asks somewhere lubrication. or has bearing problem The fuse is colored and the resistvalue stands mosttime on the top of the fuse.
7/17/2016 3:54:51 PM • OEM 2000 Mazda... • 71 views • 0 helpful votes
0helpful
1answer

99 MONTANA RADIO SUDDENLY VOLUMN GETS LOUD HOW DO I MAKE IT STOP

It could be a dirty control. I'd try some electronic contact cleaner. Spray it on the volume control to see if it helps.

It could also be a broken wire that occasionally makes contact with something it's not supposed to. If you need further help, I’m available over the phone at https://www.6ya.com/expert/david_29ad5d1dd86564b0
4/13/2016 6:45:54 AM • OEM 1999 Pontiac... • 620 views • 0 helpful votes
tip

Usage for the Lexia3 PP2000 xs Evolution to program Peugeot New Keys

Usage for the Lexia3 PP2000 xs Evolution to program Peugeot New Keys Lexia-3 Lexia3 V48 xs Evolution Citroen/Peugeot Diagnostic PP2000 V25 can support cars from 1995 to 2013. This tool is popular with the French engineer. Today we show you how to use the Lexia3 PP2000 xs Evolution to do new key programming. Tools needed: Lexia3 PP2000 xs Evolution Diagnostic Tool Attention: PIN Code is required during key programming procedure. Record your vehicle PIN code first. How to program Peugeot new keys with Lexia3 PP2000 xs Evolution: 1. Install and activate Lexia 3 xs Evolution PP2000 V25 diagnostic software. 2. Select vehicle model 307 and wait until the well communication built. 3. Check the entering vehicle information.
1helpful
1answer

Hi there,I drove through flood water and the car went off. I had it checked and was advise the spark plugs number 3 is not firing. Please advise what this issue could be. thanks."

water in a coil pack, run the fault codes to get a better determination of the fault
6/10/2016 8:32:50 AM • OEM 2007-2010... • 106 views • 1 helpful votes
1helpful
2answers

After battery replaced I need instuctions to restart radio on 1999 Mercedes C280 , I have code 4 digits

If you have the code, enter it using the numbers and then press Seek or Scan when finished.
4/1/2016 3:59:05 PM • OEM 1999... • 479 views • 1 helpful votes
0helpful
1answer

Do I need to drain the oil from my transmission when removing my transfer case?

USUALLY the transfer case is independent from the trani. do they have separate Drain plugs?
3/2/2016 10:29:28 PM • OEM 1991 Chevy... • 521 views • 0 helpful votes
0helpful
1answer

My Laptop's Wireless seems to have stopepd working correctly, possible brakedown?

Do you have it also connected by ethernet cable if so try removing cable and see if wireless connection works. also check your router setup it could have not registered the wireless setup or been turned off
4/6/2016 11:41:33 AM • OEM Lenovo... • 195 views • 0 helpful votes
0helpful
1answer

What would cause lurching?

Bad coil, bad fuel delivery. Check there.
3/8/2016 6:03:38 PM • OEM 1991 Chevy... • 431 views • 0 helpful votes
0helpful
1answer

CD player display initializing

Donna, try a different CD
2/28/2016 9:00:17 PM • OEM 2009 Ford... • 205 views • 0 helpful votes
3helpful
2answers

Van over heats when I use the AC only, when I turn it off it cools back down to normal

I believe your fans are not functioning properly, could be fans or fan switch sensor press the helpful button
1/28/2016 8:02:36 PM • OEM 1998 Dodge... • 454 views • 3 helpful votes
0helpful
1answer

Where is the turn signal flasher.

Next to the fuses, inside the car.
2/9/2016 5:19:01 AM • OEM 1996 Chevy... • 186 views • 0 helpful votes
0helpful
1answer

The radio keeps cutting out. I hear a squeal as if the phone is turning on and it cuts out for a few seconds then start again. ? as if it is looking for a radio signal?

It sounds like your radio receiver or even antennae may not be properly shielded or are failing. Here is a great website link that helped me troubleshoot a similar issue . Identifying and suppressing radio interference Please let me know here if it helped. Good Luck!
12/7/2015 5:26:55 AM • OEM 2008 Porsche... • 324 views • 0 helpful votes
1helpful
1answer

My BOTH rear speakers are very distorted and garbled. This is a Bose system in a Cadillac Touring Coupe. If I adjust the balance the rest of the system works perfect.

It would appear based on your comments that the amplifier(s) responsible for the rear speakers may have been overdriven and the outputs are toast. Hence the highly distorted output on the speakers.
10/13/2015 8:08:35 PM • OEM 1999... • 1,025 views • 1 helpful votes
0helpful
1answer

How do i reomove my whole water pump housing frame on my 96 cadillac eldorado

Undo all the bolts ,remove the drive belt and tensioner remove hoses and every thing else that is in the way prise off with a ***** driver or leaver bar.
2/13/2016 9:36:07 PM • 1996 Cadillac... • 39 views • 0 helpful votes
0helpful
1answer

I lost my key,locksmith cut a key it crank but won't start up.its indicator is shown on the dashboard

Sounds like the Key has rough edges so not connecting correctly. Run your finger either side of key this will feel which side needs slight sanding, even use nail file if one side is rough. This should now work. Cross F
2/3/2016 4:43:03 PM • 2000 Ford Ranger... • 45 views • 0 helpful votes
Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top OEM Experts

Brad Brown

Level 3 Expert

19187 Answers

John
John

Level 2 Expert

510 Answers

 Mikey
Mikey

Level 3 Expert

6904 Answers

Are you an OEM Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...