Nyko charger won't charge
Had same problem with blinking lights and not charging.
Plug charger base in (blinking lights), remove controllers, and plug USB cable into front charge slot (behind hinged panel). This reset charger base and lights stopped blinking. As FYI - the USB was connected to other device (charging it). Add the controllers and correct charging lights show up - including the controller 1 and 2 symbols. Controllers now charging.
on Sep 21, 2017
My wii remote just stopped
Try removing the batteries after you turn off the system. This will turn off the power to your Wii Remote. Once it's off, put the batteries back in and turn on your Wii. If nothing happens on the Wii Remote, then it needs new batteries.
If you're still getting weird errors, push and hold the power button on your Wii for ten seconds. If you have problems after doing this, contact Nintendo at 1-800-255-3700.
Nyko Wand? for...
on Apr 29, 2017
Alkalines won't work in my 360 controller.
there are units designed to run on rechargeable batteries and some that run on alkaline batteries
the difference is the current draw required
alkaline batteries have a high discharge rate available but for short duration while the others have a smaller discharge rate but over a longer period of time
you should only use the type of batteries recommended for the unit
on Apr 12, 2017
Set up for Nyko air flow pc.
all games and most games for that matter do support game pad and so does the pc. Though with some pad you will need its drivers to get it working.
On the other hand games that i call "click and follow" such as rise of nations can never be played with a game pad and also the game must support game pad. For pacman i found out it supports 4 way joystick which means you should not have any problem playing with the game pad since it has the 4 way navigation buttons.
good luck with your game
Nyko AIR FLO...
on Nov 03, 2016
Not finding what you are looking for?