Null Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 14 Products
  • 35 Answers
  • 2K Views

Hi, You can unlock your Samsung SGH A-177 safer and easier using unlock code. You can get the unlock code for your Samsung SHH A-177 from http://www.wickedunlock.com/samsung-a177/rs11wp9/ at affordable cost.
Here are the steps for unlocking a Samsung SGH A-177,
1 - Switch ON your Samsung A177 without any SIM Card.
2 - Compose : #7465625*638*CODE#.

Null Samsung... | Answered on Sep 28, 2018


Hello you can download a manual from here:

http://www.foxconnchannel.com/ProductDetail.aspx?T=Motherboard&U=en-us0000108&Language=en-us

But BE CAREFULL when you change the cpu.
And remember to add some cooling paste.

Here is some info about the cpu:

http://ark.intel.com/products/27452/Intel-Pentium-4-Processor-511-1M-Cache-2_80-GHz-533-MHz-FSB

You will get better performance with a new mainboard/cpu
as this cpu only has one core.

Good luck

Null Computers &... | Answered on Jun 18, 2017


I can't stand the tempstar smart valve! Now I'm not sure what a dc90, but if you have a gas fire residential furnace I know what it is. The smart valve controls gas and flame proving only. The blower issue is probably one of the high temp safeties that has stuck. During a call for heat, your system verifies that all safeties are closed. If this sequence is not correct, then the unit assumes that the unit has overheated due to a high temperature safety issue, and brings the blower on to cool it down, normally for 90secs. Also if the unit is calling for heat when the power is turned off, still calling for heat when power is turned back on(like you said by throwing the switch), this will also bring the blower on for 90sec, then blower will/should turn off, and the heat cycle will start. So if your tstat is calling for heat(heat on and set temp higher than accrual temp), and you turn off power then turn power(main voltage) back on, this will bring blower on for 90secs. Now, the burners staying on is a different issue. I've not seen that in 15 yrs of service on a smart valve. There is probably 24volts feeding the "W" circuit, for some reason. On the control board there is a terminal block with R W G Y C. The W is your heat. This W receives a 24v signal from your tstat. Turn off power, remove W from the board, then turn power back on. If no heat then you've isolated your problem to the control wire coming from your tstat, or the tstat itself. If it continues to heat with W disconnected then its something in the furnace, circuit board? Hope this helps!

Null Heating &... | Answered on Mar 05, 2017


Try his birthday, anniversary, and other important dates for the combination.

Heating &... | Answered on Jan 24, 2014


You can get the unlock code for your Samsung phone from ProUnlocking.com and unlock your phone from Network lock easily.

Null Cell Phones | Answered on Jan 23, 2014


Problems with software installed in the scale contact manufacturer.

Health & Beauty | Answered on Jan 05, 2014


I have a samsung sgh-c165 but it is say that phone freezed please help !

Null Cell Phones | Answered on Jan 02, 2013


Hi if you want to unlock your Samsung mobile from network lock .Then visit Mobileunlocksolutions.com here they ask you the mobile model ,network name to which your mobile is locked and the IMEI number of your mobile .Then at last they deliver you code to unlock your mobile.

Null Cell Phones | Answered on Oct 10, 2012

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Null Experts

Jerry Smith
Jerry Smith

Level 3 Expert

2150 Answers

TUSHAR PANDYA
TUSHAR PANDYA

Level 1 Expert

19 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a Null Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...