Nu Mark Recent Questions, Troubleshooting Help & Support

Look for a small whole below the tray on the face of the player that looks like you could stick a paper clip into and then stick one it it push firmly but slowly into whole and unlock tray.

Yes take it to your local numark dealer and they will send it out or fix it right there. sounds like the faders blown.

• Go to Numark's website https://www.numark.com/account/index.php when you set up an account and log in at that link you can register your item.

Regards, Tony

Hi gregory_fils,

Please read the manual which came with your nu mark axis 9 to see if it is compatible with your computer if so, there should be instructions in the manual.

i hope this helps.

it can replaced...give it to good repairer...

"PHONO" is ONLY for an old school turntable that would require a PHONO preamp, so that leaves, uh, LINE.

It's more than a matter of gain as Phono cartridges require special equalization to restore flatness to the sound recorded in a vinyl groove.

my axis 8 does. i just dont have it anymore so i cant recall how to tell you how to do it but it does

look 4 a reboot to reboot the cdplayer . or call pns music 412 828 1003 they will help u.

That is the result of a bad file. Ive come across many of them in my downloaded music collection.

Here is what you need

http://www.avaxdownload.com/0e3/dl/numark+cm100+schematic.html

The manual claims the auto-closure is after 30 seconds.

http://www.retrevo.com/support/Numark-CDMIX2-CD-Players-manual/id/530ci855/t/2/


401.658.3131

www.numark.com

There's an Ask a Question section online that requires user information. Perhaps you could use that to see if there is a secret way to adjust the tray delay....

http://www.numark.com/content54

Try cleaning the laser pickup using a Q-tip and a dab of rubbing alcohol, very lightly clean in a circular motion and allow several minutes to dry.

get a new one problem solved

cds will not play not after the draw is closed it will take a while to play

Hello

Will you please give me a brief description about the fault of your CD player, and the circustances led you to go with that set to a repair shop? I wish to know the first time problem with your set, more than about the repair and component replacement. Give me it briefly. OK.

Hi and welcome to FixYa!

Just a thought on the issue. Yes i had the same problem before. All I did was to take the unit on a certified cd mixer tech for calibration. They have a machine to do this procedure.

Hope this helps and thank you for using FixYa! Have a good one!

hi theres many a solution for this problem on fixya ive tried them all from lowering my download speed to taking them apart but no 1 mentions recalibrating your axis 9 i havent had this problem so far since recalobrating it so its worth a try!