No operating instructions
No oil needed - is hot air popper. Use round lid on top to measure popcorn, pour popcorn into metal part in center of popper.
3/5/2010 7:16:48 PM •
Nostalgia...
•
Answered
on Mar 05, 2010
•
1,093 views
I have a Seeburg MCU3 Prelude - had is repaired a
No, but like any machine, it does need lubrication once in a while. You should purchase a manual for it (eBay).
If the clutch has become stuck, it's time to call in a pro.
Are you sure it's in "PLAY" mode? Check to be sure the service switch is in "PLAY."
Does the motor turn?
If yes, try pressing the reject button on the back. Maybe it's stuck thinking it's playing a record in an empty slot (clamp arm will be against the turntable). There is also a manual trip lever just to the right of the tonearm. lift up on it if the motor is turning and see if that triggers it. Go ahead, it won't hurt you.
if the motor itself has frozen up from lack of oil, try putting some light machine oil (NOT 3-in-1 or anything paraffin based) in the oil cups on the side of the motor and letting it sit for a few hours. Then, turn the motor shaft by hand a little. This may free it up. if so, count your blessings and call someone in to give the whole mechanism a proper lubrication or something else will eventually seize up or wear out.
Good luck.
2/28/2010 8:11:29 AM •
Nostalgia...
•
Answered
on Feb 28, 2010
•
303 views
Its a 120v 670w motor for the ccp-510 I need the
Call them at this number and see if they can provide you with a source for the "replacement" motor.
The Helman Group, Ltd. 1621 Beacon Pl. Oxnard, CA 93033-2452. Phone: (805)487-7772. Fax: (805)487-9975. Tollfree: (800)217-1958.
1/15/2010 7:05:53 PM •
Nostalgia...
•
Answered
on Jan 15, 2010
•
358 views
How much oil do you put in with the chocolate?
Experiment with it. Start with just a little oil and periodically add more until it flows properly. Be sure it sets up when it gets cool, if it doesn't you have to much oil.
Good Luck,
Gilshultz
12/3/2009 3:26:50 AM •
Nostalgia...
•
Answered
on Dec 03, 2009
•
234 views
How do i change needle on record player no
release the orange case from the back and slide forewards.Note,use athin knife blade to ease the case sides 2no. from holding points on head.BUT THERE MUST BE A BETTER WAY???.
11/26/2009 5:15:05 PM •
Nostalgia...
•
Answered
on Nov 26, 2009
•
79 views
Where do you buy the motor for CCP-509 popcorn
I think I would look at a electric supply place for a motor like the one found in a popcorn machine. Another tip would be a resturant supply place.
Good luck on finding your motor and thanks for posting at FixYa.com
11/3/2009 12:22:04 AM •
Nostalgia...
•
Answered
on Nov 03, 2009
•
328 views
Not finding what you are looking for?