Cooling issues
sounds like the thermostat. can you bypass it (ie connect the two wires together) and make it run all the time? If so, replace the thermostat
4/22/2014 9:15:07 PM •
Nostalgia...
•
Answered
on Apr 22, 2014
•
518 views
Need a part for rival bf150 cn fountain
I need a base to my rival beverage fountain which has started to leak, I have really enjoyed it and I dont want to get rid of it because the rest of it is in good condition. BF150/25006EFADD1
2/15/2014 7:17:31 PM •
Nostalgia...
•
Answered
on Feb 15, 2014
•
368 views
Wiring diagram
That is a thermostat, there are no replacements available.
2/13/2014 7:54:13 PM •
Nostalgia...
•
Answered
on Feb 13, 2014
•
183 views
Will not heat up
That is a thermostat. it should have continuity at room temp, and open at popcorn popping temps. There are no replacement parts for this manufacturer.
2/13/2014 7:52:33 PM •
Nostalgia...
•
Answered
on Feb 13, 2014
•
174 views
The kettle motor will not turn
Either the motor has failed, or switch. Inspect wires to look far any disconnects.
There are no parts available for this manufacturer.
2/13/2014 7:38:07 PM •
Nostalgia...
•
Answered
on Feb 13, 2014
•
125 views
Will thermostat stop kettle from overheating and blowing thermal fuse
The thermostat built into the kettle stops the kettle from heating at a prescribed temperature. usually around 425 F. This is hot enough to smoke and cause instant burns, but is the required temp for popping popcorn.
I do not know of a "thermal fuse" built into popcorn machines. Mechanical thermo stats are not flawless. they can and do malfunction, either too cold or too hot. the model popper you have is not adjustable, or repairable.
If you are tripping a electrical circuit breaker that is a different problem not related to kettle heat. It is a symptom of an overloading problem of your outlet, or a ground fault in the popcorn popper.
11/4/2014 9:06:45 PM •
Nostalgia...
•
Answered
on Nov 04, 2014
•
1,136 views
Replacement parts
Replacement parts are not available for any Nostalgia Electrics equipment. Sorry.
1/31/2014 7:23:40 PM •
Nostalgia...
•
Answered
on Jan 31, 2014
•
474 views
Ice maker not making ice
Sounds like the intake line at the entrance to the refrigerator is plugged with lime residue. It has a needle valve in the center and will clog with foreign material, this can be cleaned out by forcing compressed air pressure backwards thru this connection to remove tiny particles inside.
12/29/2013 12:26:56 AM •
Nostalgia...
•
Answered
on Dec 29, 2013
•
458 views
Not getting cold
No.1 is it getting power, if it is then check if compressor is running if it is then gas could be the problem, if not running then it could be a board. If it is under 2 years old it will be covered by warranty, contact http://www.nostalgiaelectrics.com/
12/2/2013 11:11:06 AM •
Nostalgia...
•
Answered
on Dec 02, 2013
•
185 views
Not finding what you are looking for?