I need a replacement rocker switch.
This switch is from a good size Chinese firm.
ZHEJIANG GUANBAO ELECTRONIC CO.,LTD..
This switch has been replaced and is not manufactured any more. Take the switch to an electronics supply store to find an equivalent. Their web address is www.guanbo.com, and they have an English language section, if you do not speak Chinese.
Any fitting switch, with a 10 Amp 125 Volt rating, should be acceptable.
The countryside where this firm is located is beautiful.
I have been there.
7/25/2015 11:43:49 PM •
Nostalgia...
•
Answered
on Jul 25, 2015
The popcorn gets stuck in the kettle until it
I have a Popcorn machine from Nostalgia too that had this problem. I cleaned it out and everything but it still had the problem of the it getting stuck. After days of analizing, I found the solution. after a while the ceiling of the popcorn machine starts to fall in, lowering the handles of where the kettle goes. making the knob that turns being lower that the one that makes it turn, causing it to get stuck, all I did is add so leverage so the kettle is once again at the same level or higher. Making it turn with greater force and not getting stuck. In other words make sure the turning mechanism is leveled and not one lower than the other. preferably the kettle part being higher.
5/24/2015 6:22:20 PM •
Nostalgia...
•
Answered
on May 24, 2015
Not finding what you are looking for?