Northwestern Bell Recent Questions, Troubleshooting Help & Support

First of all, thank you very much for choosing FIXYA today for your online technical support needs. I'm Joe, and I will be more than happy to assist you with your service request.In order to obtain a replacement manual for your NORTHWESTERN BELL 2005T phone you will have to contact the manufacturer directly at the following link and order a hard (paper) copy directly from them: http://store.unical-estore.com/manual.html Just use your mouse to click on the link, which is the underlined and blue highlighted text just above. I believe they only charge $1 US for shipping the document to you. Unfortunately, the manuals for this line of phones are unavailable for downloading online so that is your only recourse if you need that manual. Good luck.Joe.

This should be the manual you are looking for:http://www.telecomuserguides.com/manuals/filesupload/FutureCall/Future-Call-FC-20270-Big-Button-Plus-Phone-Owners-Manual.pdfHope this is helpfull

The complete user's manual for your phone is available at the following link:

http://www.retrevo.com/d/df/MANUAL000032975.pdf?doc=532906c5a747ab87134404141e9c11c8&ts=1313184836863&rk=0.17208479428095913


Just use your mouse to click on the link which is the highlighted and underlined text above. This will open a new browser page for you automatically and allow you to download the manual.

Here is an excerp from that manual which describes how to set the time and date:

GETTING STARTED

Caller ID Initial Setup:
After the battery installation and telephone line connection the display will show the Set Language screen:

Set Language

1. Press the Review UP or DOWN button to select the desired language.
E=ENGLISH
F=FRENCH
S=SPANISH

2. Once the desired language is selected , press the ERASE button to
confirm selection.

3. Then the display will change to the Set Time / Date screen and the hour icon will be blinking.

Set Time/Date

1. Press the UP or DOWN button to set the current hour.

2. Press the ERASE button to shift to the minute setting.

3. Repeat steps 1 and 2 above to set MINUTE, MONTH and DATE.

4. Once the correct TIME/DATE is shown on the display, press the
ERASE button to end the setting. Then the display will change to
show the normal status.

Changing The Language Mode and TIME/DATE

1. Press and hold the ERASE button then press UP button.

2. Then follow the steps described above.

Good luck, I hope this was helpful.

Joe.

You may try this: 1. Pick up the handset and listen for a dial tone. 2. Press and release the STORE button. 3. Enter the phone number(up to 16 digits)you want to store into memory(The telephone number will not dial out) 4. Press and release the STORE button. 5. Press a one-digit number(0 - 9)on the keypad to store the phone number into the desired memory location. 6. Hang up the phone by returning the handset to the handset cradle on the base. 7. To store more phone numbers in memory, repeat steps 1 - 6 Good Luck !!

The phone has lost contact with the base phone when the power was disrupted. so the best way to reset is to remove the power from the base phone - remove the adapter, remove the battery from the hand unit . Now reset and connect the power while it must MESH up. If not try to use the intercom call. If the phone does not mesh then there can be error in the base phone.
Please repeat this once again.

Hold the RINGER button down for 3-5 seconds until you see the red Ring Off light on the top right of the hand held go off.