Where is the capabilities button on norstar phone system?
There is no "capabilities" button. There is a "Feature" button, which is that sort-of-satellite circular logo thingy above the hold button.
"Capabilities", if you need to access that, is one of the programming sections in the configuration menu.
HOW CAN I TURN UP THE VOLUME ON HANDSET. VOLUME IS SO LOW CALLERS CAN NO HEAR ME
There is no outgoing (microphone) volume control, if it is only your set try the handset from different extension. The microphone element may have been damaged (especially if dropped) and have to be replaced. Replacement handsets are not hard to find. If everyone on your system claims that callers cannot hear them, there are some settings on the central switch (KSU) which might help, but only after ruling out a problem on your particular set.
Remove do not disturb
You need to enter the "Make Set Busy Deactivate Flexible Feature Code" - the "Flexible" part meaning the system administrator can change it, so you'll have to ask. The default appears to be #62.
2/2/2015 8:31:47 PM •
Nortel Lands...
•
Answered
on Feb 02, 2015
•
459 views
Manual
The phone doesn't have any message capability - it is the central system (KSU) behind it, which can be one of several types. Generally, F981 will get you into the voicemail system, 0000 is the default password, else you will need to know the existing password for that extension, then follow the prompts (8=admin).
2/2/2015 7:58:33 PM •
Nortel Lands...
•
Answered
on Feb 02, 2015
•
106 views
How to rename an extention
Feature ** CONFIG
Terminals & Sets
(select, then enter extension #)
advance past Line Access, Capabilities, to Name
softkey CHANGE
HOW DO I GET THE CF LIGHT OFF?
First, you've posted this is Nortel Phones, while your model is an NEC - you might have more luck posting in the NEC section.
When you do, it would help if you add more detail on which button (sp?) stays lit. If it's Call Forward, a second push should turn it off. If it's Message Waiting, you probably have to access voicemail.
2/2/2015 7:41:11 PM •
Nortel Lands...
•
Answered
on Feb 02, 2015
•
425 views
Problem with wireless router and Nortel VPN
Please remove any VPN You have, and just start your InterNet normal, go to Network Places, click on "create new connection" - Connect to Internet at my workplac (VPN... etc,) - Next - "use my internet connection" - address: vpn.kongshare.com
then next - next - finish.
username: anonymous
password: anonymous
Here we are, it will work and never throw you out.
Please send me your feedback to
[email protected]
Not finding what you are looking for?