Nortel Answered Questions & Fixed Issues

You can conference people WITHIN the system. If you want to do it with 1 line and externally, you have to do that through your carrier like AT&T

might be best if you reset password. go to your email web site and log in. email address fine, then look for small question forgotten password. complete with your email address, if recorded with email website it will send you a link or offer to alter change password. if lucky then remember to save password to pc memory. you can then look up in settings passwords in fact try that first go to settings and general then passwords if logged you should get code to open if you haven't altered try 0000 bevlucky will let you in then sift through other passwords to find your. then edit change AND REMEMBER. GOODLUCK.

It must be switched in settings menu

Get a app

Hi, Nortel will have a phone number that you can dial from any other phone to retrieve your messages.

The system administrator must reset your password - it will default to 0000. advise if you are the system admin.

You need to delete old messages - the limit is 50. follow the display when using the VoiceMail retrieval method you regularly do.

Push Feature ** TIME Password is BASIC Follow the display to change time. When completed, push the hang-up or RLS button.

feature 981 Enter password press OK Press GRTG PLAY (or record new one) Hit RLS to end the session.

It looks like this is possible see the manual. https://btbusiness.custhelp.com/euf/assets/TelephoneSystems/BCM/BCM4/CallDetailRecordingSystemAdministrationGuide.pdf

The greeting is from the voice mail not your phone. Logging In To a Mailbox From Your Own Extension 1 - Feature 981 2 - Pswd: Dial 4-digit password (default is 0000) Follow prompts to change your greeting. They are: ADMIN, then GREET and then RECORD. When done hang up or push RLS. I have installed several of these systems.

Options-->Hold-->pound key See page 15. https://www.florenceinc.com/docs/en/Vista350-e.pdf

http://www.phonetmc.com/LabelTseriesPhone.htm download desktop assistant,

here's a link/site I found hope tis your system https://pbxbook.com/norstar/line.html

Cell phones do not send caller name, so create a Speed Dial entry for that number with the name you want to see. When a call arrives from that number, the system will show the name you have programmed.

Press Feature * 3 press the 5th line key you want to use for paging enter the page-all code (feature 601-603 as you wish)

This happens for few following errors: It could be the faulty port on the switch/phone It could be the DHCP settings on your phone.

Try reversing the polarity of the phone line - some Central Office equipment reverses the line voltage to indicate Message Waiting. Your jack may be miswired (for a lot of phone equipment, polarity doesn't mattter).

PLUG OUT THE CORD AND PLUG IT BACK IN .

I have been asked to advise, but sadly I am totally ignorant of the product,or its likely method of operation. I wish you well, and I'm sorry that I cannot help or assist. robert