1120e phones keep rebooting
The phone's configuration is likely corrupt and it will need to be reset to factory defaults and reprogrammed.
To stop the reboot cycle, try this:
- Connect the phone to POE (Power Over Ethernet) injector, but do not plug in a data cable into the injector.
- When the message "Cable Unplugged" appears on the screen, connect a data cable to the POE injector.
The phone should return to an online state.
8/14/2013 2:36:59 PM •
Nortel 1120E
•
422 views • 0 helpful votes
Nortel phone voicemail
Hi Oscar,
It sounds like your voice mail and your phone extension are either totally different from each other, or your voice mail isn`t licensed properly.
Does the phone run on batteries
The phone can get some power from the loop like a basic telephone. That should suffice to make phone calls.
But many of the advance features and display options cannot work on loop power alone. You have to get a special plug that plugs into the wall AND the phone jack. Then plug the phone into that.
I am not aware of any battery in the phone.
Why a blinking red light Radio Shack 5.8 GHZ 43-5560 phone
You have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.
How to disable the speaker on the phone
On most older nortel systems you can use the feature,*,6 buttons to adjust the ringer type, along with type you can set the volume by using the up/down volume buttons.
6/21/2013 7:41:42 PM •
Nortel...
•
136 views • 0 helpful votes
M3903 - no dial tone
Unplug the phone from both the line and power adapter. Let it set for at least a couple of minutes. You may have activated call forwarding - all accidentally, if that happened the problem will be in the electronic exchange, not the phone. Find out what the "cancel call forwarding" code is for your system....
Changing the date and time
feature,*,*,23646 (or admin) from the main unit should get you into the settings, the password is the same unless your installer changed it. Time and date should be among the first settings you can scroll through.
Not finding what you are looking for?