Nortel Logo

Nortel Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 390 Products
  • 4K Answers
  • 246K Views

You need to use an AC power supply on the base IP Phone 1140E for the backlight on the Expansion Module to work.

Nortel 1140E | Answered on Jan 26, 2016


Hello, depending on the status of the call the buttons will change automatically. Be aware that you may not be the initiator of the call so you may not have all the features. I hope this helps. If not you may contact me at: http://www.liveperson.com/nortel-guy

Nortel 1140E | Answered on Jan 26, 2016


Yes - download the opperator manual from net at
http://www.nd.gov/itd/files/services/voice/1140e-user-guide.pdf

You can use the mute feature to block 2 way speech

Nortel Avaya /... | Answered on Jan 26, 2016


C1B is ancient UNIStim firmware. You cannot downgrade to it. Try converting to a more recent UNIStim version. You can download firmware from www.nortel.com/support.

Nortel 1140E | Answered on Jan 26, 2016


Try a different phone on the same router, does that fix it?

Nortel 1140E | Answered on Jan 26, 2016


your phone's LCD display is defective and it should be changed. I have a similar problem but till it works that way, I can live with it. Actually I have 3 more with good display - hehe....

If annoys you, get a used one from Amazon for 44 USD

http://www.amazon.com/Nortel-Meridian-M7208-Telephone-Gray/dp/B0018JVOP2

Sending it to repair might cost you more.

Nortel Meridian... | Answered on Nov 24, 2015


To reset your voice mail password,on press feature 983 the screen should say log:
enter 1020000 (default password) if you have a 3 digit intercom number, 120000 if you have a 2 digit intercom number
the display should say mbox, AA, and othr above the three soft keys
press the mbox soft key
the screen should say add, del, and chng above the soft keys
press the chng soft key
enter in the mailbox number you wish to reset the password on
press ok
the screen should say reset and next above the soft keys
press the reset soft key
press the Rls key
your password should be reset to 0000

Nortel T7316E... | Answered on Nov 10, 2015


Do not believe that you can that comes from the phone company .

Nortel Norstar... | Answered on Nov 04, 2015


This is usually programmed as one of the 'soft' buttons down the right hand side of the device - subject to the programming of your phone / and the system.

Usually the T7208 is connected to the BCM range of PBX systems - in which case, to transfer a call, you'd use Feature 70. You could, of course, program this into one of the buttons yourself, so you only have to press one button to do so.

Hope this is of use to you. :)

Nortel Lands... | Answered on Oct 06, 2015


I managed to find the manual, but it does not say a thing about this. I think your provider has to give you the information, with the incoming call. When he switched that information of, your phone can't display it. Sometimes the providers charge you extra for that service. If, on the same extension, another phone did display the number, perhaps hetre is a way to switch it on, but I could not find it.
The link is to the manual.

http://ipf.msu.edu/_files/pdfs/user-guides/norstar-t7208.pdf

Nortel Networks... | Answered on Oct 06, 2015


Try pressing the Feature key followed by "#65". We've also used this to clear phantom fax messages which Avaya Achillae (formerly Nortel Nancy) notifies via voice prompt when checking VM manually.

If that doesn't work, you may need to delete/re-create the voice mailbox, which should completely reset the VM indicators for that box.

Note: Assuming you're on a BCM system -- if you're testing VM by calling from one extension to another that has a "full" mailbox, calls may be refused or be forwarded to Call Center or Auto Attendant (if either are set up on your system). BUT, calls from outside may still get to VM just fine. I'm told this was by design.

Nortel Business... | Answered on Oct 06, 2015


Enter the admin mailbox (usually FEATURE 981). Follow the prompts to enter the mailbox change menu for the box you need to reset and select the "reset password" function. This unlocks the box and sets the password to 0000, which will then prompt the user to enter a new password when the mailbox is opened.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/dave_fb2c45146b845cea

Nortel Computers... | Answered on Sep 05, 2015


There is a call back feature in the system. Sometimes when you receive an internal call from another extension and you are on another call the caller will hit callback. You actually have to return the call to that extension to stop the light from flashing.

Nortel Computers... | Answered on Sep 05, 2015


You could have a CICS, and MICS or a Nortel BCM. Which do you have?

You will need to access admin programming, do you know how?

Nortel T7316E... | Answered on Aug 20, 2015


Is it programmed to ring in configuration programming

Nortel Meridian... | Answered on Aug 20, 2015

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Nortel Experts

MrFixitSTTL

Level 3 Expert

312 Answers

ray gallant
ray gallant

Level 3 Expert

62046 Answers

Tom Chichester

Level 3 Expert

51372 Answers

Are you a Nortel Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...