NorStar Lands Phones - Page 4 - Recent Questions, Troubleshooting & Support

Contact your phone service provider or look on line for instructions from the phone manufacturer.

When you've entered that, you should be asked for a password. Then it will take you into that loop. The default password is 23646

Norstar M7310 features inactive All features are inactive. I have done the following: 1. Press [Feature] **938378 (XFtest). The password will be 266344 (Config). 2. Your display will read Feat code: and you will have options First and Exit. 3. Press First. The first stored feature code will appear, and you will have options Test, Back, and Next. 4. Press Test. Your options will read Remove and OK. Press Remove. 5. Once the feature code is removed, press Next to go to the next code. 6. Do this with all codes until your display reads None Registered 7. Release Next I am told to Restore connections to the voicemail ports from the KSU. Power the system back up. But I do not know how to do this. Please advise. Thank you!

sounds like one of your buttons are stuck. look over the buttons to see if one is a bit uneven or take each button and jiggle it outwards

your line button is stuck down, play with it to free it.

Good for you Pamela. You can go ahead and ask it now.

I guess you want a page key programmed on your set. press feature *3, press a memory key, press feature 610. This key pages all sets when pressed.

right!

press feature * (star (shift 8)) 3, push the memory key (speed dial), then feature 0. This programs speed dial to that memory key.

Centrex line are offered by the phone company. Have someone within your company, with authority, to call the sales team of the phone company and have the password of the voice mailbox of that line reset.

Just think about it, why would you want to auto dial yourself? You don't need an autodial key for yourself so the system don't allow you to program it.