I am trying to program a button on my Norstar
the access code is the number you dial to access an outside line like 9 or 81 etc.
To program a button to access a certain line pool, press feature *3 press the button you want to be the line pool access button then press feature 64 and the pool access code. ex. feature 649 or feature 6481
on Aug 07, 2015
I am locked out of
to reset the administrator pasword enter feature 985 press 9, at the password prompt enter 73738767793 (resetsmpwsd) and press ok or #,press yes to reset password. password should be defaulted to 0000. then try Feature 983. if your system has 2 digit intercom #s your password is 120000 if your system has 3 digit intercom #s your password is 1020000.
on Jun 29, 2015
Why can't I answer a call on line 2?
Confirm the extension # you are working with and that the line 2 key is line 2. do this by pressing feature *0 and the pressing the intercom key, observe the display and then press line 2 key and view display. then go back in the programming and view line 2 apear&ring, change it until it is apear&ring, then release and check for working again. If this dont work check to see if line 2 is programmed as a private line.
on Jun 28, 2015
Not finding what you are looking for?