NorStar Logo

NorStar Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 250 Products
  • 2K Answers
  • 270K Views

to reset the administrator pasword enter feature 985 press 9, at the password prompt enter 73738767793 (resetsmpwsd) and press ok or #,press yes to reset password. password should be defaulted to 0000. then try Feature 983. if your system has 2 digit intercom #s your password is 120000.

NorStar M7310... | Answered on Aug 08, 2016


The buttons could have been programmed to dial the same number or defaulted to dial it.

NorStar Lands... | Answered on Mar 31, 2016


You need administrative rights to get into the PBX. Once in there, you can assign which phones receive incoming calls. It has been years since I worked on the meridian system, so I can't tell you the way to do it, but it is in the manual. It's not complicated. You can also set it up for DAY/NIGHT mode so that in the evening, if required, all phones could ring on incoming calls so that anyone in the building can answer them.

NorStar Meridian... | Answered on Mar 24, 2016


Did you check for the volume control and its adjustments? Do you have the setting on "mute?"

NorStar M7310... | Answered on Mar 24, 2016


You NEED to get SYSTEM documents (Hard Copy or CD)
for NORTEL NORSTAR CICS before TAMPERING ...URL posted below...

Found on page 24:
Default Password Code is "admin" on your phone dial... Done by pressing 23646 on your phone dial...

Time feature is accessed by inputting **8463 = (**TIME)

Hope this helps...

(CAUTION: read & understand BEFORE programming)

http://phone.manualsonline.com/manuals/mfg/nortel_networks/compact_ics_61_system_coordinator.html?p=24

NorStar T7316E... | Answered on Feb 04, 2016


PDF]Telephone Features Programming Guide - Avaya Support

https://downloads.avaya.com/css/P8/documents/100142941 AvayaNORTEL NETWORKS is a trademark of Nortel Networks. ... All other trademarks and registered trademarks are the property of their ... One-line and two-line displays . ...Memory buttons . ... Call anomalies for telephones without line buttons . .... Select how you dial your calls . ... Receive a busy signal on an internal call .

Norstar How to program phone how to program voice mail ...

www.phonserv.com/1_PDF_user_guide_meridian_norstar_phone_syste...
Nortel Networks Meridian Norstar How to program voice mail phone feature codes ...Modular ICS KSU must be programmed with an M7310 or a M7324 telephone. ... Lift handset, press Voice Call key or press the Feature button, then press 66 2. .... At the LOG: prompt, enter your mailbox#(extension #. and your password all ...

[PDF]N QRTEL NORSTAR


NorStar M7324... | Answered on Jan 18, 2016


The restrictions are intended to prevent you from making long distance billable calls using a company phone. The restrictions are set at the time of initial installation of the system.

NorStar M7310... | Answered on Jan 06, 2016


If you mean for line 3 to be selected when you pick up the handset, you need to program that as the "prime line" for that set.

NorStar M7310... | Answered on Dec 21, 2015

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top NorStar Experts

Marvin
Marvin

Level 3 Expert

84529 Answers

Brad Brown

Level 3 Expert

18031 Answers

Tom Chichester

Level 3 Expert

51311 Answers

Are you a NorStar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...