Nordic Track Exercise & Fitness - Page 4 - Recent Questions, Troubleshooting & Support
My Nordic Track 1300 Commercial elliptical makes a
Dear Sir:
Thank by your request, I hope everything is o.k
I will try to help you, inmediately.
1)
Pedal Arms
1
Use aflat screwdriver to unseat the tabs that hold the front top cover in place. Thiswill expose the flywheel and pedal arm connection points. Rotate the flywheelby hand and determine whether lubrication will accomplish the repairs. If thebearings are exposed, use a grease gun with an extension nozzle and lubricateboth bearings with lithium grease. If the bearings are damaged or sealed,proceed to the next step.2
Removethe front and side covers on the main frame. Hold the flywheel with one handand use a box wrench to loosen the bolts that secure the pedal arms at eachside of the flywheel. Pull the arms away from the flywheel and remove thebearings from each side.3
Test thebearings as before. Lubricate exposed bearings with lithium grease andreinstall them. Sealed bearings must be replaced. Reattach the pedal arms tothe flywheel. Replace the main frame covers and front top cover to complete therepairs.
If you need further assistance, please reach me.
Thank you in advance, sincerely. God bless you.
E.CUADDRA
MANAGUA, NICARAGUA. C.A
How to turn it off
You have to turn off the power switch at the front of the treadmill near the power cord.
I updated the firmware and now all I get on the
Had the same problem ...it seems my list of problems is growing not getting shorter....it's been two weeks and the thing still isn't running yet becasue the calibrate system fails, wifi is connected but no internet , speakers hum, ..this small system runs android but it runs so SLOW......even the latch bar couldn't be installed because the hole underneath was too small for the screw to go thru....
Incline doesn't work
My treadmill won't stays in the incline position can't get it to come back down
Not finding what you are looking for?