Nissan Popular Questions, Answers, Tips & Manuals

Was the oil drained after the overheating occurred? You may have contamination from just before overheating. Did you find the root cause for it? Low coolant / no coolant, stuck thermostat, failed water pump, etc. Or The cylinder head job was done badly, did they use a new gasket, did they torque the nuts correctly? Or The cylinder head is fine, but the block is cracked. You could try Holts Wondarweld https://www.google.com/search?q=holts+wondarweld ..

https://gearfixes.com/nissan-rogue-door-lock-problem/ This article may help you solve your problem.

I have a 2006 pathfinder and I find you have too turn it to max or hi it heats then and then set it back to required setting

I would look for 12volt supply to the port. Possible blown fuse.

The torque settings for the Nissan Urvan YD25 engine are as follows: Cylinder head Bolts: 27Nm (20 ft lbs) Intake manifold Bolts: 7Nm (5.2 ft lbs) Exhaust manifold Bolts: 7Nm (5.2 ft lbs) Oil Pan Bolts: 7Nm (5.2 ft lbs) Oil Drain Plug: 25Nm (18.4 ft lbs) Timing Chain Tensioner Bolts: 7Nm (5.2 ft lbs) Camshaft Sprocket Bolts: 25Nm (18.4 ft lbs) Crankshaft Pulley Bolt: 215Nm (159.2 ft lbs)

My guess is that the thief's chipped key cause the security system to block your key. Is the security light flashing? Try a reset. There are a few ways listed in the link, do the battery disconnect one as the last resort. https://www.google.com/search?q=2001+nissan+sentra+reset+security+system If those don't work, you need an auto locksmith with a scan tool computer to pair you key and spare key. If you only have one key, get him to make you another. https://www.google.com/search?q=auto+locksmith+near+me ..

But was Skippy okay? https://www.google.com/search?q=remove+my+front+bumper+on+my+2005+N16+Nissan+Pulsar+sedan ..

Using an inferred thermometer check the temperatures of both the heater hoses that go to the heater core. The inlet hose should be about the same temp as the engine. The return line slightly cooler. If both hoses are not hot, then you may have a bad thermostat or restriction in the hoses. If you can see the heater core, check the different tube fins to see if they are hot or not. Check to see if there is a shutoff valve in the system.

Lots here, take your pick. https://www.google.com/search?q=2009+Nissan+Armada+6+lug+alloy+wheel ..

Question edited for clarity, add maker. Question moved to model category. Click on that image https://www.google.com/search?q=2017+nissan+altima+head+unit+pinout+diagram and you end up here https://pinoutguide.com/Car-Stereo-Nissan-Infinity/Nissan_Altima_2016-2018_H_pinout.shtml ..

Question edited for clarity. Question moved to model category. Above the glove compartment. Already answered on Fixya :>) https://www.fixya.com/cars/t25448225-fuel_pump_relay_located_1999_nissan More here and diagrams https://www.google.com/search?q=1999+Nissan+Frontier.+Fuel+pump+relay+location ..

Question edited for a lot more clarity. Question moved from Boating Category. AI Chat GPT4 answer by Shwet deleted. You remove the head bolts from the outside inwards, criss crossing to the middle. This is the opposite of reinstall which is centre to edges. https://www.google.com/search?q=2000+nissan+frontier+twin+cam+16+valve+ka24de+remove+head ..

Question edited for better English, spelling and shorter sentences. You bought an antique, it is nearly 40 years old. You are supposed to restore them and only take them to shows on Sundays :>D Yes the wheels are tuning on axle stands because there is no load. It is strange it got you home but wouldn't work the next day, but my theory is that because you were thrashing it, the clutch plate is soaked in oil from a bad main seal. Remove the clutch, see what is going on behind it. Restore it and drive it sedately. Diesels are not fast engines. https://www.google.com/search?q=1984+Nissan+Civilian+Motorhome+having+drive+issues ..

https://www.titantalk.com/threads/heater-fan-not-working-help.191170/ This site will give you a few ideas on what to look for.

Click on the link and then the images tab. https://www.google.com/search?q=Nissan+KA20+engine+injectors+wiring ..

The specific type of fuse used in the under hood compartment of a Nissan Frontier SV for running lights can vary based on the model year. It's essential to consult the vehicle's owner's manual or the fuse box cover for accurate and up-to-date information on fuse specifications. The owner's manual typically provides a diagram of the fuse box, indicating the purpose of each fuse and the correct amperage for replacement fuses. If you don't have access to the manual, you may find this information online or contact the vehicle manufacturer or a Nissan dealership for assistance.

Question edited for clarity and make a sentence. Question moved to model category. Normally you tighten the hub nut whilst turning the wheel until it locks solid, then you back off a quarter turn and it should turn freely. https://www.google.com/search?q=Nissan+Frontier.replace+front+wheel+bearings ..

https://www.fixya.com/cars/t27137815-nissan_np200_dci_1_5_location_1_fuse https://www.google.com/search?q=2019+Nissan+NP200+Diesel%2C+radiator+fan+relay+location and Coolant Temperature Sensor https://www.google.com/search?q=2019+nissan+np200+diesel+coolant+temperature+sensor+location ..

Question edited for clarity.

Nissan Note E11 EM.pdf

Academia.edu https://www.academia.edu > Nissan_Note_E11_EM_pdf Remove cylinder head assembly. J INSTALLATION ? Install in the reverse order of removal paying attention to the following. Cylinder Head Bolts K NOTE: Use ...

Nissan CR14DE (1.4 L) engine

Engine Specs https://www.engine-specs.net > nissan Step 1: 24.5-30.3 Nm; 2.5-3.0 kg·m; 18-22 ft·lb; Step 2: Turn all bolts 95-100°. After securing bearing cap bolts, make sure crankshaft turns smoothly by hand. Pros and cons: Rough idle ? Loss of power ? View full list

Nissan HR15DE (1.5 L) engine - Engine Specs

Engine Specs https://www.engine-specs.net > nissan Cylinder head · Step 1: 40 Nm; 4.1 kg·m; 30 ft·lb · Step 2: Turn all bolts 60° · Step 3: Loosen all bolts completely · Step 4: 40 Nm; 4.1 kg·m; 30 ft·lb · Step 5: ... Pros and cons: Enhanced control and reduced system friction improve response ? High power output ? View full list ..

The proper way to reset the ABS light in Micra is by clearing the codes with an OBDII scanner. The difficulty is that the cause of the light could be either a bad wheel speed sensor, low brake fluid, a blown fuse, or a malfunctioning ABS module. If that problem is discerned and resolved, the light should automatically go out. If it doesn't, that is when the codes must be manually cleared by a scanner. That is the best information I have found.