To exit burn in mode on your Element TV, press the arrow up then down then power on the remote, and try it again.
If that doesn't work, try pressing arrow left/right/power on the remote.
To pair your Ruwido Amadeus R 9710 remote to your TV, you can follow these steps:
Insert Batteries: Your remote is powered by two 1.5 V AAA batteries1. Make sure to insert the batteries correctly.
Switch on your TV: Ensure your TV is turned on.
Press the TV key: Press the TV key on your remote control for approximately 4 seconds until the LED flashes twice.
Enter the Code: After seeing the 2 flashes and within 5 seconds, enter the 3-digit numerical code from the list provided with your remote2. After entering the code, the LED will flash twice indicating that the code has been accepted.
Test the Remote: Point the remote control towards your TV and press the key. If your TV does not respond by going into Stand-By mode then repeat steps 3 to 5 and enter the next code in the list.
Bed.-Anl. H2 Version1 (ruwido.com)
Never heard of this maker before Gwen, seems South African.
All televisions need a remote, otherwise you can only do simple tasks. Copy remotes are readily available which are NOT Universal Remotes.
https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote
All sets have manual controls and they are hidden under the lower right front or on the angled rear panel. This 32" AIM says they are lower right edge, On, Off, Channel UP & Down, Volume Up & Down, plus Menu and Enter. Look about a third of the way down the document.
https://manuals.plus/aim/aled-32hda-32-inch-digital-hd-ready-led-tv-manual
You need the Model number, but AIM replacement remotes below
Question edited for clarity.
Question moved from Smart Computers to Televisions.
Duplicate question deleted, refresh page to see your question.
Is this television new to you? Did it work before? It sounds like you haven't connected it to WiFi, or there is a connection issue. Click Comment under here and let me know.
https://www.google.com/search?q=ecco+lh32s+connect+to+wifi
What is the signal source? The TV subtitle control will only work for OTA channels (RF) and possibly native apps. For a Roku TCL TV, go to Settings from the Home Page. This should put you in the Options configuration display. Select Accessibility and press OK. Navigate to Captions Mode and set to OFF. Then click OK to save the setting.
If your source is a set-top box of any sort (cable/satellite box, DVD Player, etc), you have to turn off the subtitles from the box's remote/menu. Depending on the device, this could be easy or hard. One of my neighbors had a single satellite box for two TVs and needed captions on the second set. That meant turning on captions on both sets using the menus on the main TV. On my current set-top box, I have to go to Menu > Settings. Then I enter a code from my provider to access the menu and enter the Hardware settings. On this box, the captions control is under the Audio settings.
I hope this helps. Please add a comment with more information on your source if you need help changing the subtitles on a specific streaming service or set-top box.
Cindy Wells
Remove the wall plug to the television and remove the batteries from the remote.
Wait 15 minutes.
Put NEW batteries in the remote. Plug in the television.
Do you have a smartphone with a forward facing selfie camera? With new batteries in the remote control aim the remote at the front facing camera and press the power button on the remote, You should see a red flash on the smartphone screen, and if you do, the remote control is working.
Sinotec are cheap and nasty televisions and not worth repairing.
..
Question edited for clarity.
Question moved from Cell Phones Category.
Cable Television DVR, Satellite Television DVR, Security System DVR?
Make and Model should be on the statutory label near the mains cable, 'make model, serial number, voltage'.
The generally have a reset button hiding in a tiny pinhole.
..