Nikon Logo

Nikon Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 3K Products
  • 99K Answers


Nikon Cameras | Answered on Feb 11, 2019

Can anyone help me.

So I recorded an important interview on the weekend with a NIKON D3300 but didn't know it was on mute instead of Auto microphone..

Is there a way that I can unmute this video while editing please??

Nikon D3100... | Answered on Feb 11, 2019

First of all, you can download a manual from here.


Basically, with certain types of lenses you need to set the aperture ring on the actual lens to its minimum setting (f22 or f32). Once it is set here, the camera can then control the aperture. It's covered on page 16 of the manual.

Hope this helps,


Nikon N60 35mm... | Answered on Feb 07, 2019

of course you will need a program to be able to retrieve those files, try recuva, ease use, or zero assumption to recover

Nikon D70s... | Answered on Feb 05, 2019

Well for starters you need to update the firmware at

Nikon Coolpix... | Answered on Feb 04, 2019

Is this close enough?

If not, contact Nikon direct

Contact Us - Nikon Canada

Contact Nikon Canada. Call, email or connect with Nikon ... Nikon Repair Service restores your product to factory standards with genuine Nikon parts. Schedule ...

Nikon D-50 Total... | Answered on Feb 03, 2019

Go shopping on Google put model number on there and you should come up with all sellers and prices

Nikon Dtm-a20lg... | Answered on Feb 03, 2019

Try removing battery fully charge then restart camera after 10 min. on the SD card try reformatting and or try other card and ket me know the outcome.

Nikon Cameras | Answered on Feb 03, 2019

Is the camera in airplane or power saving mode?

Nikon D Cameras | Answered on Feb 02, 2019

If you're in manual mode, you have to press the (+/-) button and then rotate the command dial at the same time. This will allow you to lower or raise the aperture f-number.

Nikon Cameras | Answered on Jan 27, 2019

Hi Check for any dust or dirt that could be stuck around any of the buttons on the camera. If the camera is under the impression another button is being pressed (because of dust dirt) then the OK button will not work. If you cannot find any button that seems to be jammed then it maybe the sensor behind the OK button has failed. We hope the suggestions helps to get the camera running again

Nikon Cameras | Answered on Jan 24, 2019

Hi To reset the camera to the default settings you must go into the menu and choose "Reset All" We hope this helps

Nikon Cameras | Answered on Jan 24, 2019


Here are some suggestions to try and see where the problem may be:

1. Have you tried to charge the battery? We would suggest trying different USB sources (e.g. a USB port on a computer as well as the Nikon supplied AC adapter)
2. Could the battery be dead? If you have tried to charge the battery in the camera via USB then there is a chance the battery is dead and needs replacing. If the camera had not been used for a long time and the battery was stored with little or no charge, the battery may now be un-chargeable.
3. If the camera has been left unused for a long time the internal battery that keeps the time/date may have discharged. You need to be able to set the time/date before the battery can be charged. If you plug the camera into a USB power source and you can see the menu on the LCD then set the date/time.

We hope these suggestions help to get the camera back up and running

Nikon COOLPIX... | Answered on Jan 24, 2019

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Nikon Experts


Level 2 Expert

132 Answers


Level 2 Expert

261 Answers


Level 3 Expert

84027 Answers

Are you a Nikon Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides