Nikon Office Equipment & Supplies - Page 9 - Popular Questions, Answers, Tips & Manuals

I would advice please reinstall the driver from your CD then try to scan it....may be last driver was coorupt in your mac

Greetings,

Let me first offer the scanner manual:
http://www.nikonusa.com/pdf/manuals/scanners/LS8000_en.pdf

Starting at page 56, it shows you how to load the holder and the direction to insert it into the scanner.

Starting at page 62, the manual covers the Nikon Scan application... Check out section 3 on page 64. This section explains how to scan more than one image from the holder.

I hope this helps. Please let me know if you need further clarification.

Thanks, but the problem fixed itself. After leaving the scanner on for a very long time, the LED finally started to glow steadily. Now after power cycle it only takes a few seconds to become ready.

Hi, I have the same problem. I am running on the same computer with the same software Nikon Scan without problems. Found out that the problem happens mostly when a crop is selected that just eliminates the scanning frame. Without crop mostly OK. However no reason why and no real solution

hi,
You can buy it from ebay.com.


Thanks & Regards!
mannu_rakesh

come to me I will remove that.

Did you install the scanner latest driver for your Operating system?
if not, go to the scanner manufacture's website to download it
it should be in the support tab
Good luck

Try a good scanner program called vuescan. Much better than Nikon software. I have been using on XP for a long time and no problems

Hello sir,                When a "dll" file goes missing you'll need to uninstall and reinstall the Polaroid Pola Color Insight software. That'll solve the problem sir. 
If you dont have the software driver for Polaroid Pola Color Insight then you can download it from  the follwoing 

for MAC operating system http://download.cnet.com/Polaroid-PolaColor-Insight/3000-2098_4-3497.html
for WINDOWS operating system http://download.cnet.com/1770-20_4-0.html?query=Polaroid+Pola+Color+Insight&searchtype=downloads&filter=os=25|platform=Windows&filterName=os=Windows%20XP|platform=Windows&tag=ltcol

Thank you. Please rate fixya if you are satisfied. Good day.

try to delete the printer from printer & faxes.......
then reinstall both of the printer, make sure the port is right

Hi,

So, you tried to reinstall the drivers ?

http://h10025.www1.hp.com/ewfrf/wc/g...reitem=sj655cz

Can you see the scanner in Device Manager? Click on Start, right click on My Computer, then choose Properties... . Click on the Hardware tab, then click on Device Manager. Look for any ?'s or !'s that you see. Or, check for the scanner under Imaging Devices. Do you at least see the scanner device? If you do, then you've at least narrowed it down to perhaps an application issue.

What error messages do you get when you try to scan?

Thanks

There is a lock on the oper side. release the lock and the other side also opens like a door

It's not necessary to delete the previous scanned photo. To scan another slide, place it in the scanner and press the PREVIEW button.

Sometimes this is caused by scanning a Kodachrome or thick emulsion slide on the "Positive" setting. Set it to Kodachrome and try again.

Sometimes this is caused by dust on the reflector mirror. I know it was a big problem here.
Ifyour scanner is under warranty, you can ship it in to have itcleaned to their service center, or if not, you can give it a shot yourself. Iwould only do this if you are a mechanically inclined person and arewilling to do it RIGHT. Here's a link to instructions:
http://www.pearsonimaging.com/articles/howto/ls5000cleaning.html
Irecommend reading through it at least once before beginning, and makesure you've got the materials you need on hand as well as a cleanworkspace. It worked on our machines. I give them a once over every so often to keep them sharp.

Bryan Clark
DVD Your Memories
Slide Scanning Specialists

Go to Nikon's official website, then search for support. You'll be able to download all the drivers and Nikon Scan software. Hope this helps.

The LS-2000 is a "legacy" device to XP and the Nikon software. It needs to be connected to a true SCSI bus adapter, and it's actually pretty finicky about which ones will work in XP. Sorry, you won't be able to use this with your laptop.

I have asked lender to find drivers, they say they will!

Stepper Motor Failures
Within the first 6 months of purchase I had to return the scanner twice to replace the stepper motor. The symptoms of stepper motor failure are a loud grinding noise during scanning followed by the enlightening message:
"The scanner has reported a hardware error. The present function cannot be continued. Sense: 0x04620000"

service required to fix stepper motor

Try to eat the Cake.

What are your symptoms? What I mean is, how do you know you are infected with viruses?

Many times problems stem not from viruses, but malware like adware and spyware. These malicious programs can be detected and removed using anti-spyware programs like MalwareBytes and SUPERAnti-Spyware.

You can download them here:

MalwareBytes:
http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572.html?tag=mncol

SUPERAnti-Spyware:
http://downloads.superantispyware.com/downloads/SUPERAntiSpyware.exe

Hope this helps!