Nikon Cameras - Page 7 - Recent Questions, Troubleshooting & Support
Lens will not retract Monitor bland.. error message turn camera off remove lens
Hi.
I experienced the lens error message after taken the camera to the beach. Sure enough, there was sand all over the lens mechanism. First, I cleaned the area by blowing air to remove all sand particles (this took me almost a day). In my case, I did not have to remove the lens from the body of the camera. Once clean from dirt, sand or any other foreign object replace the batteries.
Nikon coolpix s3000 lens error
Foreign body of some kind (grit, sand, hair etc) has entered the lens extension / retraction gearing. Probably not worth cost of repair.
How do you change a nikon camerer coolpix 5200 from belgium to english
I am NOT an expert on this problem as I have never changed languages. Language is typically in the TOOLS menu (Wrench) It you get to settings and English is greyed out then I am stuck. If you have many settings you want to keep please ignore what I say here. One workaround that MAY work is reset to factory settings. It could be one of your settings that keeps language setting greyed out. A reset makes the camera like you just purchased it new.
Nikon D40x indicate battary low
Rechargeable Lithium-ion 7.4V 1000mAh Nikon D40x battery for sale,20% off! Full one year warranty! For more info visit: http://www.nikon-coolpix-replacement-battery.com/d40x.htm
10/21/2019 10:40:43 AM •
Nikon D40x...
•
Answered
on Oct 21, 2019
Nikon Coolpix L840 bridge camera doesn't power up. Will using a contact cleaner which leaves no residue be OK to try?
I had an issue where the camera would not turn on and if it did, then it would be rarely at all. I attempted to replace the batteries, removing memory card, cleaning for sand and dust, and practically everything that has been recommended online. I was able to fix the issue by holding the preview pictures button (I don’t know the actual name of it but it looks like a rectangle with a play button in the middle) which turned the camera on to view the pictures. Then, I went into menu > clicked over to go to settings > and went down until I found “reset all.” Afterwards, I tapped the button that takes the picture and all the sudden it was good as new. It will turn on and off as it did before the issue arose. I don’t know if I just got lucky or this will work for others, but I wanted to share.
Using Nikon coolpix as webcam
If this is possible, which I doubt, instructions will be found in the manual which accompanied the camera upon purchase.
Not finding what you are looking for?