Nikon D - Recent Questions, Troubleshooting & Support - Page 8

You could probably use either a 1.4 x or a 2 x, depending on how much you wanted to increase the focal length of your lens. A 1.4 x would give you a range of 98-420, a 2 x would give you a range of 140-600. Having said that, teleconverters are not usually recommended for use with zoom lenses, and you would lose one stop with the 1.4 x, two stops with the 2 x, thus necessitating longer exposures. Also, with the increase in focal length comes an increased probability of camera shake being more apparent, due to the increased magnification. In your position, I would attempt to get closer to the subject, using a teleconverter as a last resort if this is not possible.

Man, you must of forced it in backwards or upside down. Try needle nose pliers to get it out and hope you have not damaged the contacts.

Either too low an ISO or too narrow an aperture.

Are the controls set in a position that does not allow flash? For example, in some scene modes, flash is excluded, as it is in S or A modes. Also, if your camera has a flash control, make sure it is not in "Flash off", a lightening bolt with a diagonal line through it.

Fire wire is old and never competed with USB. They may be able to transfer data, but you probably fried your camera. Possibly due to older USB format.

It is actually an error message generated by your compact flash and means that the card is no longer readable. A lot of D70 owners have reported this error without being able to find another solution other than reinserting the card or changing the card to a different brand. You could also try cleaning out the memory card slot and check to see that all pins are aligned and not bent.
Good Luck,
Jeff

Nowadays, some camera mfrs are protecting their equipment by ensuring that no third-party batteries can be used (presumably by incorporating some kind of firmware check). They say that using generic batteries will invalidate your warranty. You may have to spend the extra and get an own-brand battery, which should solve the problem - hopefully.

The problem stated by you is not contain full information. Monitor screen not turning on due to, screen failure, connector flex cut inside, if you can see images on computer means screen has failed. Replace it at a authorised cameta outlet.

This happens during malfunction of mirror and shutter.that is when cliked shutter opens but mirror did not go up so blank monitor screen hence no image in card. Take to skilled technician to replace shutter loader mechanism.

Format the SD card first.

You can download a manual by Googling the make and model followed by the word Manual, then follow the appropriate link(s).

Once embedded in the picture, there is no simple way to remove the date mark.

However, there are lots of image editing packages that are able to remove unwanted parts of a picture in a computer. It takes a bit of work, but it is worth learning how to "photoshop" pics, as you can improve them in many ways, even removing unwanted lampposts or parked cars.

Go to Nikon website for manual download.

hi, did you charge your battery full ? if the battery is not charged enough, it will not drive the shutter opener motor perfectly, and if any type of dirt or friction on the shutter drive gears this will happen, please check the shutter movement by removing the lens.

hi, external flash can use.

Good morning. You have likely already gotten an answer to this, but yes, it will. Unlike less expensive models such as the D40, D60, D3000 and D5000, the D90 has a built in autofocus motor, which means that all Nikon F-mount autofocus-lenses (except two for the rare Nikon F3AF) can be used in autofocus mode for all newer generation autofocus lenses like the Tamron 200-800. However, you may want to look around a bit, as Tamron has come out with a new 150-600 lens that is simply terrific (I know, I own one) and the Big Sig from Sigma is equally great. FYI Good luck.

Hi Robert, I am thinking of one cause but first you will have to answer a simple question for your self before proceeding. "How old is your camera?" If it is old enough, the problem you are encountering is technical and you will surrender your camera to a qualified technician/ camera service center for proper check. Digital cameras are electronic equipment; thus have component parts such as capacitors, resistors etc that are almost dead. the first time you power on, they work fine but as the heat builds up, those parts stop working completely. that is when you cannot take any more pictures. Only trained technicians can fix that kind of problems.

Well what what dont you understand?

iPhone "Cannot Take Photo" Because Not Enough Storage ...

osxdaily.com/.../iphone-cannot-take-photo-not-enough-storage-workaro...

Jun 4, 2014 - Temporary Workaround Takes a Few More Pics. ... as a camera willinevitably get the "Cannot Take Photo - There is not enough available ... But you should be able to take at least a few more shots. Interestingly, you'll notice that after taking a handful of pictures with this trick, the iPhone will initiate the app ...

Re: Camera saying busy and won't take pictures - Canon ...

community.usa.canon.com/t5/.../Camera...won-t-take-pictures/td.../3676...

Aug 11, 2013 - When I go to take a picture, it will act like it is focusing by flashing... ...The "default" shooting mode of the camera for focus is called "One Shot" AF. ... It's also helpful to know some information about your lens and shooting ...

How to Free Up Space on Your iPhone or iPad ' TIME

time.com/3303735/free-up-space-on-your-iphone/

Time

I have not done the replacement yet, but I can tell you where the battery is. It is located underneath the USB/Power connections on the left side of the camera. There are several covers and boards to remove to get to the battery.