Nikon COOLPIX - Popular Questions, Answers, Tips & Manuals - Page 9
How to keep fash on a Nikon coolpix s6800
You don't. The flash needs to recharge between stills. And if you want light for a video, a flash isn't going to do it. The term "flash" means just that, a brief flash of light. For video, you need a dedicated video light.
Troubleshoot nikon vr&iso1600
Probably an issue with the gears needed to shift the lens - take it to the repair facility, but be prepared for a hefty bill. May be cheaper to replace.
How to clean very sticky exterior?
First of all, have you any idea what substance is causing the stickyness ? A fairly safe start would be to lightly moisten a lint-free cloth, then wring it out until it is almost dry, and try gently rubbing an area of the camera, possibly the base plate.
If there is discoloration on the cloth, the chances are the contamination is water-soluble, so repeat the process until you are satisfied with the results.
WARNING! Do NOT let liquid enter the camera - the cloth must be almost dry.
If it is not water soluble, then you probably need to take it to a repair facility and let the technician clean it, as many solvents are harmful to the paint and plastics used in camera bodies.
NIkon cool pix 5400 will not turn on. Battery is fully charged.
A couple of possibilities. The battery is bad and not accepting a charge. Replace the battery. The battery terminals are dirty. Using cotton swab and some isopropyl alcohol, clean then fully dry the metal contacts on the battery and inside the battery compartment. Before turning it back on, be sure everything is fully dry.
Horizontal lines have appeared on the screen what has caused this and can I get rid of the lines.
The LCD in the viewfinder likely has connection problems or broken circuits. Did you drop it recently? Was it subject to extreme temperature etc recently? You may find the lines shift around or even go away for some time. That would imply bad connections. If your technical enough to disassemble it, there is often a rubberised connector use between the LCD and circuit board that can be cleaned. It's delicate work tho.
Not finding what you are looking for?