Night Owl Optics Home Security - Recent Questions, Troubleshooting & Support

The only way is to connect it to a vg computer type screen and then get in the menu if you changed the resolution on your tv you should then get in the tv menu and changeit there

Open up the password browser and enter...519070 that's the Default. I have years of experience with the night-owl system. INSKIP

any luck - I have the same problem

how do i connect to my cell phone

forget password

Call their help desk they say is the only way..

If you had changed the default password that came with your system- #1. Contact either the manufacturer, installer, or vendor from where you purchased your system from; they should be able to walk you through the steps of how to reset the password to its default. And then from there, you can change it to the password you want to use. If you never changed the default password, your user manual will have it for you...in the event you lost the user's / owner's manual, see #1.

Same here. Updated firmware system rebooted and locked on the Night Owl screen. Mine is the FS-8500.( DVR model FS-500 ). Anybody find a fix to the issue? I believe the firmware is in the motherboard. Anyway to hook to PC and "push / force" the firmware into the DVR. Or some tyoe of master reset. Or is this thing bricked for good.If it cant be fixed, do you know where I can get a new motherboard with firmware installed. Tried talking to tech support but am fighting with them over the issue. Pretty freaking useless over there.

I wish I could do the same - I changed video out setting and can't get back..... any luck on your end>?

Has to be a connection on video cable or channel on tv your trying to view the camera on

If your DVR is networked you can use this utility to recover the passwordshttp://seanmsiegel.com/blog/raysharp-password-hack-exploit/ nightowl dvrs seem to be made by raysharp

I forget the password of my sentient cctv h.264 please help me

Open your camera's software net viewer, using your IP address Port and password if necessary and proceed to the replay. Select/activate, when the Calendar view opens up. select the double << and go to the month that you need to.