NexxTech Recent Questions, Troubleshooting Help & Support

You need a DVD burning software program like Nero (paid) or Deep Burner (free). Then you can burn to blank DVD media. You can also go to CNET downloads and find a program you like, here is the link: http://download.cnet.com/windows/video-software/?tag=rb_content;contentNav

Return it to provider and ask for a new one. If no way to return it, you lost you money. Get a new one

If the system detects it, you should be able to read/write on it. Check your bios to see if its enabled.

Have you tried the 32 bit driver? Many things will not have a specific 64 bit driver. You may need to install in compatability mode.

It could be any of a number of things, but the first 2 guesses I am going to make are: 1) The contacts in the cigarette lighter jack in the tractor are corroded; or 2) the wires that power the cigarette lighter jack in the tractor are too small of a gauge to provide enough current flow without a voltage drop. This one can be tested by popping the cigarette lighter jack out of the dashboard while still wired (carefully, you don't want to cause a short-circuit), and then plugging in the inverter and measuring the voltage with a multimeter going INTO the lighter jack. It should be at least 11.5, preferably 12, Volts. Test both before and after the inverter is plugged in. If the after reading drops too much, then you know you need a bigger gauge wire feeding the lighter jack.

re-install the drivers after uninstalling the previouss drivers.

press another one at the same time

1)Press "SET" button for more than 3 seconds until digits of certain area blinks. 2)Press " ADJUST " button to increase digit reading value of year, month, hour, minutes...etc. of the blinking area ( Note: all adjustments are towards increasing increments only. Just cycle if accidentally past the required setting ) 3)Press "SET" button once to jump from one area of adjustment to the next...example from calendar to month to hour to minutes to seconds....etc. 4)Press "mode" button to confirm all settings 5)Finished

www.driverguide.com/driver/company/NexxTech/index.html

The most common way to set those buttons is to tune in a station and then press and hold the button down that you want to set it to. It will beep of flash to show you that it has preset.

Hi, good day. if not mistaken either your mouse or CPU is " Dell ". use another Brand if mouse begins to fail. I had same problem. changed to HP mouse and problem solved.