New Bright Answered Questions & Fixed Issues

about an hour or so

If you take the look at the price in the link
http://www.buzzillions.com/reviews/new-bright-radio-control-hummer-h2-1-6-scale-black-reviews
then you will realise why it does not worth to someone sell only the parts you need since you can buy the whole unit at this prices. So you should think to buy a whole unit and if you love the one you already have you can transfer all the parts you need and have also some spares.

It's supposed to be silver metal with a hole in it.

ebay, or hobbyshop, or hobbyzone

all toys like these and many other devices regularly have different sized chargers, but the current running through them is the same, if you can find something that fits into the charger, it will work. additionally, you could go to any electronics store and buy a universal charger, which comes with voltage changers and different heads to fit all voltage requirements, and all plug size requirements.

i want to know where to buy a charger fo rmy new bright 19.2v nicd battery pack

A 1:14 Mudslinger requires a 6 Volt battery. Not a 19.2 Volt. Now when you go purchase this battery make sure it says 6 Volt not a 6 Cell. Here is the style battery you need. http://www.all-battery.com/6vrccarreceiverbattery.aspx
Starting from the top left you can choose the first 5 depending on the shape of the one you have for the RC and the mAh you want. The term mAh indicaters milliamp hours. Basically how long the battery will last. More bang for your buck basically. But they cost more too. They will all function the same. But the ones with less mAh will run out of juice sooner and have to be charged. All these connect the same way from the same style connector. So don't worry about that. Hope this helps.
Regards, Tony

I think I'd get one of those chargers that will fit anything- select the right plug and voltage, you're in.

eBay is where I'd check first.

lp

Is this a toy? Or is it a Toyota?

yes just look at the boot sales or flea markets ,find a 9v charger with correct end on ,or visit the local chinese emporium and no b?doubt you will find a charger in their of 9v its a fairly common voltage ,9.6?? well 9v will do it fine ,or even a 12v one but dont leave it connected for any length of time

Yes, additional track is available from several places, such as Hobbylinc.com, and TowerHobbies.com. At this time, just after Christmas, they are out of stock, however. Walthers.com has them in stock (1-4-2011). You can find extra track on sale on eBay, as well. Be sure to get the track with the brass covers, as New Bright sells battery powered trains that use bare plastic track, which will not work with the 384. A Google search will turn up more sources.

The batteries go in the first car following the lokomotive, the coal tender. There is a small black knob with a ****. Turn it, and it will open the top part, so you can put the batteries in. This train set will not take a rechargeable battery. Bummer...

they might be dischared or low charged one.

This is usually caused by either the batteries not fully charged in the remote or the vehicle. Make sure you have fresh batteries in both the vehicle and remote.

radio shack or ebay maybe.

Hi,
Check in your instructions if the frequency of the controller and the car can be changed...
If it can be changed to another channel then change one of the cars to the other channel...if it cannot be changed take one of the cars back and find another car that runs on a different channel...they often make the same model with different channels so you can run them head to head...

heatman101

Hi, there is a HD sound box speaker fixed in the unit.if there is no sound coming that means either the speaker which is emitting the sound out is got faulty or the speaker wires have got loose or got cut in between. The unit needs to be opened and checked. It is not very hard but bit checking with meter or continuity tester is required to check the speaker and its wires....

craig list

Hi,

Sorry to say but New Bright does have these replacement parts hence you need to try hardware stores to see whether you can get a similar adapter . Check the V and the power it should not be an issue.

Thanks

Hi,

You can download and print the instruction manual in PDF format by clicking this link.

Adobe PDF Reader is required to view this manual. Download Adobe Reader

Hope this helps. Kindly let me know if you have any difficulty in downloading the manual.
Thanks for using FixYa.