Netopia Answered Questions & Fixed Issues

here's the link I found that the Ralink RT73 driver seems to work with the Netopia TER/GUSB-N1. I found a form about how to install on a MAC maybe it will be helpful to you

check here
http://www.tuxpages.com/helppages/gentoo-wireless-3d.shtml

Using a router is a great way to create a home or office network without having to spend a lot of money. As long as you have a broadband Internet connection through an Internet service provider, you can use a router to get all of the computers in your home or office connected. If you have chosen Netopia as your router brand of choice, you will have to configure it to make your network operable. Power on your Netopia router, broadband modem and computer. Open your Internet browser. Type the router IP address, 192.168.1.254, into the address bar. Hit "Enter" on your keyboard. Log into your Netopia router with the username and password assigned to you by your Internet service provider. Select "Expert Mode." After entering expert mode, you will see a menu bar at the top of the configuration window. Click on the "Home" tab. Many Internet service providers will ship your Netopia router to you preconfigured. If it is preconfigured all of the fields, such as IP address, subnet mask and default gateway will already be populated. If the fields are not populated, proceed to the next step. Click on the "Configure" tab. Select "WAN." Select "ATM." Enter the "VPI" and "VCI" numbers provided by your Internet service provider. Choose your encapsulation option. For example, "Routed IP," "PPPOE," etc... Click "Submit." Select "WAN" on the left side of your configuration window. Choose the "VCC1" option. Select the option to "Enable Interface." If you do not have your own IP address, choose the option to "Obtain an IP Address Automatically." If you do have your own IP address, uncheck the automatic IP address box. Type in your IP address if you have your own. Enter your subnet mask. This information can be obtained from your Internet service provider. Select the "NAT" option if you are using your own private IP address for your network connection. Click on "Submit." Select "WAN" on the left side of your configuration window. Ensure that there is a check in the "Gateway Option" box and "IP Address" is selected as the "Interface Type." Type in your "Default Gateway" address. This can be obtained from your Internet service provider. Click "Submit." Select the "Configure" tab at the top of your window. Select "LAN." Select "Enable Interface." Type in the IP address for your router and subnet mask. Click "Submit." Click on the yellow caution symbol on the top right hand side of your window to save all configuration changes. Click on "Save." Restart your computer for the changes to become effective. http://www.netopia.com/support/hardware/technotes/CQG_121.html

Reset the router here is how

First turn off the firewall and then install it.....Open Windows Firewall by clicking the Start button->click Control Panel->click Security->click Windows Firewall.Click Turn Windows Firewall on or off. Administrator permission required If you are prompted for an administrator password or confirmation, type the password or provide confirmation. Click Off (not recommended), and then click OK.**If you need any kind of technical assistance you can contact support cell at http://www.vtechsquad.com/

Use portfoward dot com if setting up a game, but use the free instructions by hardware and game.

This will explain, doesn't your ISP provide different plans? http://www.pcworld.com/article/158552/check_ISP_speeds.html

[email protected]

you need the updated all in one driver, get it here:
http://www.drivers.proaudiosoft.com/tergusb-n.html
worked for me too!

Open browser and type IP address and loging using username and password.Once logged in, click on the Expert Mode link in the left-hand side menu (if that link is visible). In the Expert Mode Confirmation screen click on YES to continue. Once in Expert Mode click on the Configure button located on the topClick on the "Advanced" link on the left side of the page, and it will take you to the advanced configuration menu. Then click on Pinholes right under NAT. A list of the current pinholes appear, to add a new Pinhole, click on the Add button After filling out all the information, you can click Submit to store the configuration, and proceed to add more pinholes. Once the process is completed you have to click on the yellow Warning icon that appears on the top right, and then click on Save and Restart in order to Save your configuration. If you need any kind of technical assistance you can contact support cell at http://www.vtechsquad.com/

OK, do you have a question?

Reset the wireless by pushing and holding the RESET button, this will reset to default settings. Then you can reconfigure the SSID and Security. Take a look at this: http://www.routerpasswords.com/

What is a "prone"? Maybe this will help: http://www.broadbandreports.com/forum/r24696308-Modem-How-to-Setup-Netopia-3347NWG006

If you reset the wireless device you can change the SSID and security code.

Hey, the Netopia routers do not have a default username and password. If a password is already set up, you might need to reset the router.

In order to log into the router you need to Telnet into it.
If you are using Windows XP, you can start Telnet from Start>Accessories>Communications>Telnet

if you are using Windows Vista or Windows 7, Telnet is not enabled by default. You need to enable it first. You can quickly re-enable Telnet by following these steps:

Start
Control Panel
Programs And Features
Turn Windows features on or off
Check Telnet Client
Hit OK

After that you can start Telnet via Command Prompt. (or the Start menu)

then once you get into the Telnet Console, type in:
192.168.1.1

and the router interface will open up and let you chanfge settings.
[CLICK HERE] for the official Guide by Netopia.

There is no security on a wireless receiver. Security is set on the wireless Access Point or router. Check your router documentation or talk to the person who manages the wireless network you want to connect to.If I misunderstand your question please let me know and we take it form there.

You don't need the cd. Just go to http://192.168.1.254 to configure the modem. This is from http://www.motorola.com/web/Home/Products/Voice-and-Data-CPE/xDSL-Modems-IADS-and-Gateways/2247-N8_Netopia/_Documents/StaticFiles/Netopia_2247-N8=_User_Manual.PDF?pLibItem=1

You shouldn't need drivers or software to access the router. Type the IP address into you web browser and you should be able to access any setting for it. My suggestions would be to talk to your provider and see if they have a newer model. That is long since a discontinued item online.

You reset the router. that means router is set on factory default.settings has been changed now that's why connection manager is not responding properly. Now you have the run setup CD and set the router again.

Sounds to me that you have the internal firewall enabled in the router and haven't built ports or 'pin holes' to allow your ps3 to access the network through the gateway. If you know how to navigate the router's advanced setup page then the easiest option is to set it from either of the two available options for firewall security to the third option of 'clear sailing' . This is assuming that it's not just the router itself and other devices are able to connect without problem. The Netopia 3347 doesn't allow for NAT changing from type 2 or 3 which, despite what you may read, doesn't hinder gaming or speech, unless you go deep into the provisioning and are using it for vpn or as a bridge. I hope this is understandable and can at least point you in the right direction because this is one of the absolute BEST routers ever 'given away' with ADSL service from BellSouth/AT&T.T7